|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
09-20-2018, 11:20 PM
|
#6 | |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,255
|
Re: 2 1/2 x 3 1/2 rectangler tubbing
Ideas about what? You first said that you needed 2-1/2" x 3-1/2" rect tube and then said that what you are working with is 2" x 3". The 2" x 3" rect tube is readily available in several wall thicknesses. As for connecting, if there is not much room on the outside for a fish plate, use internal plates on both sides and plug weld the tube to the internal plates as well as welding the joint. And make the joint at an angle instead of a straight 90* cut.
Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
| Bookmarks |
|
|
Threaded Mode