Could use some help for those who know OEM Cranks & Dampers on BBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 09-24-2018, 06:11 PM

Thanks a bunch, I think it's good to go. I sent a note to Summit. See if they chime in, but I won't hold my breath.

I did a mock-up of the crank & cam pulleys as suggested. Looks real good. Ruler says it's right too, or the difference is so small I can't see it.

Should have mentioned, that's without gaskets. Torquing it down tomorrow. Currently juggling the rebuild with landscaping a new house. Too old for this, JK. Landscape is a passion, especially rock work. Go figure, this one is free, my ex-wife's place. Doing it for the dogs

On another note, sure glad I don't have an HOA, screw those guys "we'd like the front yard done in a few weeks." Kiss my what? I'll finish the back first thanks. On Friday a 1000 Sq. Ft. of 3x8" river rock is going to be dumped on "their" postage stamp of a front yard. Hope they like it.

09-24-2018, 06:11 PM	#8
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,692	Re: Could use some help for those who know OEM Cranks & Dampers on BBC Thanks a bunch, I think it's good to go. I sent a note to Summit. See if they chime in, but I won't hold my breath. I did a mock-up of the crank & cam pulleys as suggested. Looks real good. Ruler says it's right too, or the difference is so small I can't see it. Should have mentioned, that's without gaskets. Torquing it down tomorrow. Currently juggling the rebuild with landscaping a new house. Too old for this, JK. Landscape is a passion, especially rock work. Go figure, this one is free, my ex-wife's place. Doing it for the dogs On another note, sure glad I don't have an HOA, screw those guys "we'd like the front yard done in a few weeks." Kiss my what? I'll finish the back first thanks. On Friday a 1000 Sq. Ft. of 3x8" river rock is going to be dumped on "their" postage stamp of a front yard. Hope they like it. Attached Images __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 09-24-2018 at 11:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.