1967 C10 steering column upper bearing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mr.precision · 09-29-2018, 11:08 AM

My '67 stepper has a bit of up/down and side to side play in the steering column where it attaches to the steering wheel.
I removed the steering wheel to have a look.... and there's no bearing cup or spring in place although the bearing looks pretty good.
Any idea where I could locate the cup and spring? I see bearing kits on ebay, but not for the 1967 model. Thanks.

mr.precision · 09-30-2018, 10:22 AM

This is what I am referring to. The kit pictured is for a tilt column and won't fit my '67 column, per the seller on ebay.
does anyone have the cup and spring I could buy?

09-29-2018, 11:08 AM	#1
mr.precision Registered User Join Date: Feb 2018 Location: Fountain Hills, AZ Posts: 161	1967 C10 steering column upper bearing My '67 stepper has a bit of up/down and side to side play in the steering column where it attaches to the steering wheel. I removed the steering wheel to have a look.... and there's no bearing cup or spring in place although the bearing looks pretty good. Any idea where I could locate the cup and spring? I see bearing kits on ebay, but not for the 1967 model. Thanks.

09-30-2018, 10:22 AM	#2
mr.precision Registered User Join Date: Feb 2018 Location: Fountain Hills, AZ Posts: 161	Re: 1967 C10 steering column upper bearing This is what I am referring to. The kit pictured is for a tilt column and won't fit my '67 column, per the seller on ebay. does anyone have the cup and spring I could buy? Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.