Anyone Interested in these Parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 09-06-2018, 11:39 AM

I have a 2003 LQ4 with the following take off parts available. I understand they are common and may not be needed, but thought I would offer here first.

Truck Intake (no rails or tb)
6.0 Stock Exhaust Manifolds
6.0 Stock Camshaft (140k miles)
Truck Oil Pan, tube, and windage tray
Dipstick and tube

I can post pics of any of the parts if you are interested. Make offers.

Thanks

**michael bustamante** · 09-10-2018, 06:00 PM

I need the cover mount plate bolted to the top of the intake if you have it, it the rear square plate that holds the back of the engine cover.

**1971Stepside** · 09-11-2018, 10:31 AM

Sorry Michael. That part went with the covers when I sold them. I was able to get rid of all the other parts yesterday. Just have the dipstick and tube remaining.

**michael bustamante** · 09-11-2018, 04:48 PM

ok bud no worries. thank you

solidaxel · 09-19-2018, 09:48 AM

I am looking for a Corvette oil pan with the "Wings"

hounddogs! · 09-20-2018, 06:10 PM

Would $20 get the dipstick and tube shipped to 66049?

Loren

**1971Stepside** · 09-21-2018, 12:20 PM

Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature.

Thanks!

hounddogs! · 09-25-2018, 11:59 AM

Quote:

Originally Posted by 1971Stepside

Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature.

Thanks!

PM sent

**1971Stepside** · 09-25-2018, 01:53 PM

Got it. Shoot me your address

tmills213 · 09-30-2018, 10:47 PM

clarifying per your post above... the oil pan is gone right? i need to put turbo drain in and anticipate....me haha

**1971Stepside** · 10-01-2018, 09:25 AM

All parts are gone/sold.

09-06-2018, 11:39 AM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Anyone Interested in these Parts? I have a 2003 LQ4 with the following take off parts available. I understand they are common and may not be needed, but thought I would offer here first. Truck Intake (no rails or tb) 6.0 Stock Exhaust Manifolds 6.0 Stock Camshaft (140k miles) Truck Oil Pan, tube, and windage tray Dipstick and tube I can post pics of any of the parts if you are interested. Make offers. Thanks __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-10-2018, 06:00 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Anyone Interested in these Parts? I need the cover mount plate bolted to the top of the intake if you have it, it the rear square plate that holds the back of the engine cover. __________________ 1967custom

09-11-2018, 10:31 AM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Anyone Interested in these Parts? Sorry Michael. That part went with the covers when I sold them. I was able to get rid of all the other parts yesterday. Just have the dipstick and tube remaining. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-11-2018, 04:48 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Anyone Interested in these Parts? ok bud no worries. thank you __________________ 1967custom

09-19-2018, 09:48 AM	#5
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Anyone Interested in these Parts? I am looking for a Corvette oil pan with the "Wings" __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

09-20-2018, 06:10 PM	#6
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 887	Re: Anyone Interested in these Parts? Would $20 get the dipstick and tube shipped to 66049? Loren __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

09-21-2018, 12:20 PM	#7
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Anyone Interested in these Parts? Loren, not sure why the UPS quote from Springfield to Lawrence is so much. Would you do it for $25? If so, PM me your address and I'll get it out. My PayPal is in my signature. Thanks! __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-25-2018, 01:53 PM	#9
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Anyone Interested in these Parts? Got it. Shoot me your address __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-30-2018, 10:47 PM	#10
tmills213 Registered User Join Date: Jan 2011 Location: Normal il Posts: 173	Re: Anyone Interested in these Parts? clarifying per your post above... the oil pan is gone right? i need to put turbo drain in and anticipate....me haha

10-01-2018, 09:25 AM	#11
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: Anyone Interested in these Parts? All parts are gone/sold. __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.