60 something P10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

preciador6 · 10-02-2018, 12:56 PM

Can someone help me decode and tell me what year my truck is Thanks in advance PB1001NC

Clyde65 · 10-02-2018, 03:49 PM

With 13 places it’s a 73-80

preciador6 · 10-02-2018, 04:22 PM

Quote:

Originally Posted by Clyde65

With 13 places it’s a 73-80

No 73-80s has a different body style this a 60-66 body grill and dash completely different also

aerotruk63 · 10-02-2018, 04:37 PM

Front coil spring or torsion.
GMC emblem ran till 65 on trucks
1001 is that not 115" wheelbase ?
Would look in my literature but headed to California.

preciador6 · 10-02-2018, 04:42 PM

This is my 69

preciador6 · 10-02-2018, 04:44 PM

Quote:

Originally Posted by aerotruk63

Front coil spring or torsion.
GMC emblem ran till 65 on trucks
1001 is that not 115" wheelbase ?
Would look in my literature but headed to California.

coil spring 6 lug drums all around..ill wait thanks...Have a nice trip

aerotruk63 · 10-02-2018, 04:52 PM

Coil so 63-66
Bumper looks familiar.

aerotruk63 · 10-02-2018, 04:54 PM

SAE- .? Cast in tailights

preciador6 · 10-02-2018, 05:21 PM

I know the P is Forward control on the vin......the tail light is SAE-ST-IA-60

WorkinLonghorn · 10-02-2018, 06:47 PM

Anyway, I'll take a quart of homogenized and a loaf of white sandwich bread.

Maybe these guys would know; https://vintagestepvans.com/

preciador6 · 10-03-2018, 11:14 PM

Has 60 -63 caps

aerotruk63 · 10-04-2018, 06:56 AM

62-63 cap. Coil up front. ,looking like 63

aerotruk63 · 10-04-2018, 06:58 AM

Pic of the differential

preciador6 · 10-04-2018, 10:03 AM

Diff pics

aerotruk63 · 10-04-2018, 11:39 AM

Brake Backing plates pressed on or bolted on differential?

aerotruk63 · 10-04-2018, 11:41 AM

Passenger side of frame , on the vertical portion between the cab mounts , is there a stamped part number?

aerotruk63 · 10-04-2018, 11:45 AM

Welded bracket for pitman 63--64.
Rear coils have tighter center section or same spacing between?

preciador6 · 10-04-2018, 02:03 PM

http://6066gmcguy.com/VinNumber.html Found this but still don't tell me a year

Maybe the C is a G? on the vin plate

aerotruk63 · 10-04-2018, 03:17 PM

Looks like a G to me.
Congradulations , I'm jealous.

preciador6 · 10-04-2018, 03:55 PM

Quote:

Originally Posted by aerotruk63

Looks like a G to me.
Congradulations , I'm jealous.

Thanks

aerotruk63 · 10-04-2018, 05:19 PM

Is there a trim plate somewhere to be foun?d

**Captainfab** · 10-05-2018, 01:05 AM

The 12 bolt differential is either a '63 or a '64.

preciador6 · 10-05-2018, 11:32 AM

Thanks for the info guy's...Its a 1963

aerotruk63 · 10-05-2018, 04:30 PM

My favorite year...lol

preciador6 · 10-06-2018, 06:39 PM

Quote:

Originally Posted by aerotruk63

My favorite year...lol

Mine too now..What rear end and front end parts bolt right on for disk brakes? I will be doing an LS swap on this keeper

10-02-2018, 12:56 PM	#1
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	60 something P10 Can someone help me decode and tell me what year my truck is Thanks in advance PB1001NC Attached Images Last edited by preciador6; 10-04-2018 at 05:57 PM.

10-02-2018, 03:49 PM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,552	Re: 60 something P10 With 13 places it’s a 73-80 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

10-02-2018, 04:37 PM	#4
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Front coil spring or torsion. GMC emblem ran till 65 on trucks 1001 is that not 115" wheelbase ? Would look in my literature but headed to California. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-02-2018, 04:42 PM	#5
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 This is my 69 Attached Images

10-02-2018, 04:52 PM	#7
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Coil so 63-66 Bumper looks familiar. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-02-2018, 04:54 PM	#8
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 SAE- .? Cast in tailights __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-02-2018, 05:21 PM	#9
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 I know the P is Forward control on the vin......the tail light is SAE-ST-IA-60 Attached Images

10-02-2018, 06:47 PM	#10
WorkinLonghorn Registered User Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,899	Re: 60 something P10 Anyway, I'll take a quart of homogenized and a loaf of white sandwich bread. Maybe these guys would know; https://vintagestepvans.com/ __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, stereo speakers, 2nd owner, Work-Truck supreme.

10-03-2018, 11:14 PM	#11
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 Has 60 -63 caps Attached Images

10-04-2018, 06:56 AM	#12
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 62-63 cap. Coil up front. ,looking like 63 __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-04-2018, 06:58 AM	#13
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Pic of the differential __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-04-2018, 10:03 AM	#14
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 Diff pics Attached Images

10-04-2018, 11:39 AM	#15
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Brake Backing plates pressed on or bolted on differential? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-04-2018, 11:41 AM	#16
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Passenger side of frame , on the vertical portion between the cab mounts , is there a stamped part number? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-04-2018, 11:45 AM	#17
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Welded bracket for pitman 63--64. Rear coils have tighter center section or same spacing between? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

10-04-2018, 02:03 PM	#18
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 http://6066gmcguy.com/VinNumber.html Found this but still don't tell me a year Maybe the C is a G? on the vin plate

10-04-2018, 03:17 PM	#19
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Looks like a G to me. Congradulations , I'm jealous. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-04-2018, 05:19 PM	#21
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 Is there a trim plate somewhere to be foun?d __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

10-05-2018, 01:05 AM	#22
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,255	Re: 60 something P10 The 12 bolt differential is either a '63 or a '64. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-05-2018, 11:32 AM	#23
preciador6 Registered User Join Date: Dec 2013 Location: So Cal Posts: 698	Re: 60 something P10 Thanks for the info guy's...Its a 1963 Attached Images

10-05-2018, 04:30 PM	#24
aerotruk63 Registered User Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 60 something P10 My favorite year...lol __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

Register or Log In To remove these advertisements.