1972 Jimmy + 5.3/4L60E/NP205 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GMC-YA68** · 03-01-2017, 11:28 AM

Ens-3-1106r - trans mount
ens-3-1107r - t-case mount
ens-3-4110g - body mounts

**A1971Blazer** · 03-20-2017, 10:17 AM

I'm using the Entropy radiator as well on my swap....do you have the part#s of the radiator hoses that you used...? thanks

**GMC-YA68** · 03-23-2017, 11:49 AM

I will look thru my receipts tonight and post up what I find.

**A1971Blazer** · 03-23-2017, 12:01 PM

Quote:

Originally Posted by GMC-YA68

I will look thru my receipts tonight and post up what I find.

much appreciated...no hurry...thanks!

**GMC-YA68** · 03-25-2017, 01:03 PM

Oreilly Part Numbers for the radiator hoses.

GAT - 22437
GAT - 21439

I know I had to trim one a little bit to make it fit, but other than that they work perfect.

**A1971Blazer** · 03-28-2017, 08:06 PM

IIRC you mentioned moving the motor forward 2 inches....is there room to move it 3" ?

I finished my mount and I about to set it all in place...

I bought some Energy Suspension universal poly bushings and sleeves....
Name: IMG_1148.jpg
Views: 1167
Size: 48.8 KB

Name: IMG_1148.jpg
Views: 1167
Size: 48.8 KB

Got the frame mounts bent up.....snug fit in the frame rails......
Name: IMG_1145.jpg
Views: 1146
Size: 46.6 KB

[ATTACH]1636626[/ATTACH

**GMC-YA68** · 03-30-2017, 12:44 PM

I forget if mine was 2" further forward or not, but it sits pretty tight to my firewall. There is all kinds of room left up front though. I have Entropy with dual fans and I can "almost" still run my old clutch fan on the front if needed to. So there is that much room still.

K5 MAX · 08-30-2018, 02:45 PM

Nice build, just got done going through the whole thing looking for more gas tank pics. Also, great info for my future plans for an LS swap. How's the Jimmy doin?

**GMC-YA68** · 09-05-2018, 10:37 AM

Quote:

Originally Posted by K5 MAX

Nice build, just got done going through the whole thing looking for more gas tank pics. Also, great info for my future plans for an LS swap. How's the Jimmy doin?

Thanks, she is doing good. I think she turned over 2k miles since the swap and zero issues. Keep us updated on your swap. Don't hesitate to ask questions.

1972CST · 09-15-2018, 07:32 PM

Great build! Always enjoy getting motivation and ideas from others on here.
Are you running a factory console? Would you posting a few pics of the front seats? I was thinking of running those but recovering to look more original with no headrest.

CJM72 · 10-09-2018, 10:44 PM

Quick question for you. In post #30 it looks like you might have had to clearance the frame to fit the big Doug Thorley headers. Am I seeing things, or did these fit without modification? Thanks

**GMC-YA68** · 10-10-2018, 01:16 PM

Quote:

Originally Posted by CJM72

Quick question for you. In post #30 it looks like you might have had to clearance the frame to fit the big Doug Thorley headers. Am I seeing things, or did these fit without modification? Thanks

you are 100% correct. For whatever reasons, I needed to shave a sliver off the frame rail. They "fit" before I modified anything but it was a little too close for comfort so I shaved it down a bit.

**jaros44sr** · 10-10-2018, 04:42 PM

Nice build, I always go back to look at pics, just for the bling and shine

03-01-2017, 11:28 AM	#76
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: 1972 Jimmy + 5.3/4L60E/NP205 Ens-3-1106r - trans mount ens-3-1107r - t-case mount ens-3-4110g - body mounts __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

03-20-2017, 10:17 AM	#77
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,199	Re: 1972 Jimmy + 5.3/4L60E/NP205 I'm using the Entropy radiator as well on my swap....do you have the part#s of the radiator hoses that you used...? thanks __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

03-23-2017, 11:49 AM	#78
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: 1972 Jimmy + 5.3/4L60E/NP205 I will look thru my receipts tonight and post up what I find. __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

03-25-2017, 01:03 PM	#80
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: 1972 Jimmy + 5.3/4L60E/NP205 Oreilly Part Numbers for the radiator hoses. GAT - 22437 GAT - 21439 I know I had to trim one a little bit to make it fit, but other than that they work perfect. __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

03-28-2017, 08:06 PM	#81
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,199	Re: 1972 Jimmy + 5.3/4L60E/NP205 IIRC you mentioned moving the motor forward 2 inches....is there room to move it 3" ? I finished my mount and I about to set it all in place... I bought some Energy Suspension universal poly bushings and sleeves.... Got the frame mounts bent up.....snug fit in the frame rails...... [ATTACH]1636626[/ATTACH __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

03-30-2017, 12:44 PM	#82
GMC-YA68 Senior Member Join Date: Mar 2004 Location: Lee's Summit, MO (KC) Posts: 742	Re: 1972 Jimmy + 5.3/4L60E/NP205 I forget if mine was 2" further forward or not, but it sits pretty tight to my firewall. There is all kinds of room left up front though. I have Entropy with dual fans and I can "almost" still run my old clutch fan on the front if needed to. So there is that much room still. __________________ -Keegan- '72 Jimmy 4x4 - 5.3/4L65E/NP205 swap http://67-72chevytrucks.com/vboard/s...d.php?t=663780

08-30-2018, 02:45 PM	#83
K5 MAX Registered User Join Date: Jan 2017 Location: Panama City, FL Posts: 120	Re: 1972 Jimmy + 5.3/4L60E/NP205 Nice build, just got done going through the whole thing looking for more gas tank pics. Also, great info for my future plans for an LS swap. How's the Jimmy doin? __________________ 1972 K5 Blazer 350/350/PS/PB From GA but live in Panama City, FL

09-15-2018, 07:32 PM	#85
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: 1972 Jimmy + 5.3/4L60E/NP205 Great build! Always enjoy getting motivation and ideas from others on here. Are you running a factory console? Would you posting a few pics of the front seats? I was thinking of running those but recovering to look more original with no headrest.

10-09-2018, 10:44 PM	#86
CJM72 Registered User Join Date: Aug 2015 Location: Raynham, MA Posts: 222	Re: 1972 Jimmy + 5.3/4L60E/NP205 Quick question for you. In post #30 it looks like you might have had to clearance the frame to fit the big Doug Thorley headers. Am I seeing things, or did these fit without modification? Thanks __________________ My LS Swap: http://67-72chevytrucks.com/vboard/s...d.php?t=718573

10-10-2018, 04:42 PM	#88
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,766	Re: 1972 Jimmy + 5.3/4L60E/NP205 Nice build, I always go back to look at pics, just for the bling and shine __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.