|
10-11-2018, 04:01 PM
|
#22 |
|
Registered User
Join Date: Jul 2015
Location: North East PA
Posts: 685
|
Re: Reading A/C gauge
YOU can test the POA in the truck
TO test it idle at 1500 rpm Use a fan and put it in front of condenser (radiater) unplug the blower motor gauge on low side reading should be between 28-30 psig the POA factory setting should be 32 . there are other things to check also , Air in system make sure your heater core is not bleeding by also spray water on the condenser and see if the lowside pressure drops. |
|
|
| Bookmarks |
|
|
Threaded Mode