Front sway bar setup for GSI crossmember.

[Jimbohatro]

Looking to include a sway bar up front with the GSI suspension. Anyone get this figured out yet? If so which sway bar fit well. I want to get something going but don’t want to order a sway bar that won’t fit or can’t be made to work. Just want to avoid ordering 3 of them before I get one with the right geometry.
Posted via Mobile Device

[War_C10]

I'm interested in the same for the GSI coilover set up for my 69 GMC. The lower control arms do not have provisions to accept a sway bar so I know some fab and power coat will be required down the road. I called GSI and they say they are working on it but no word on a completion date.

[Jimbohatro]

Originally Posted by War_C10

I'm interested in the same for the GSI coilover set up for my 69 GMC. The lower control arms do not have provisions to accept a sway bar so I know some fab and power coat will be required down the road. I called GSI and they say they are working on it but no word on a completion date.

If you check out the choppin block chassis, they have one in their design. Looking at Scott’s hot rods design and I also was checking out a setup that could possibly be made to work on the Paul Horton Welder Series site.
Posted via Mobile Device