Rockwell/NP205 T-Case Swap Q? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyK20 · 05-31-2002, 09:58 PM

I am going to be replacing my Rockwell Tranfer Case with an NP205. Does anyone know if the Transmission to Transfer Case adaper sleeve is the same for both T-Cases? Also, will the drive shaft length need to be changed?

Brian19692 · 06-01-2002, 12:02 AM

I don't think the sleeve is the same but I can't remember for sure. The shafts need changed. I changed my 4-speed 4x4 over a few months ago. I had to move the t-case mount and cut a new hole in the floor for the shifter. I had the rear shaft shortened and used the front shaft from the 71 4x4 parts truck.

05-31-2002, 09:58 PM	#1
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Rockwell/NP205 T-Case Swap Q? I am going to be replacing my Rockwell Tranfer Case with an NP205. Does anyone know if the Transmission to Transfer Case adaper sleeve is the same for both T-Cases? Also, will the drive shaft length need to be changed? __________________ Eric 1969 K20, 465/205 package

06-01-2002, 12:02 AM	#2
Brian19692 Registered User Join Date: Feb 2001 Location: Des Moines, IA. Posts: 188	I don't think the sleeve is the same but I can't remember for sure. The shafts need changed. I changed my 4-speed 4x4 over a few months ago. I had to move the t-case mount and cut a new hole in the floor for the shifter. I had the rear shaft shortened and used the front shaft from the 71 4x4 parts truck. __________________ 67 short 2wd. FOR SALE 69 long box w/72 grill 69 Camaro 327 4-speed Des Moines, Iowa



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.