Step side bed dimensions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

forestb · 10-28-2018, 08:31 PM

My truck is at the paint shop and while it’s gone I want to build a peaqued roof for the bed of my truck to go under the cover so that it doesn’t turn into a swimming pool again. What I need is the length of the top from outer edge to outer edge. For the width I need the outside edge of the bed top rail to outside edge. I also need the inside edge of the bed top rail to the inside edge. If this is confusing I will draw a diagram of what I am looking for.

forestb · 10-28-2018, 08:42 PM

Sketch

Brentwe · 10-29-2018, 12:27 AM

Tomorrow morning

**The Rocknrod** · 10-29-2018, 09:53 AM

Like this?:
http://67-72chevytrucks.com/vboard/a...1&d=1247425057

Brentwe · 10-29-2018, 10:16 AM

And to add o/s measures.
80 inch of side rails, 78 1/2 i/s , don't forget about the roll on the bull board. It's about 1 1/2 inches in. 58 1/2 wide on the rails. Not sure I could actually slide a 50 inch piece between the sides. My i/s measure is 48 5/8, so if it is a drop in, leave a bit of room.

forestb · 10-29-2018, 11:50 AM

thanks guys

10-28-2018, 08:31 PM	#1
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Step side bed dimensions My truck is at the paint shop and while it’s gone I want to build a peaqued roof for the bed of my truck to go under the cover so that it doesn’t turn into a swimming pool again. What I need is the length of the top from outer edge to outer edge. For the width I need the outside edge of the bed top rail to outside edge. I also need the inside edge of the bed top rail to the inside edge. If this is confusing I will draw a diagram of what I am looking for. Attached Images

10-28-2018, 08:42 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Step side bed dimensions Sketch Attached Images

10-29-2018, 12:27 AM	#3
Brentwe Registered User Join Date: Aug 2018 Location: Chetwynd, BC Posts: 58	Re: Step side bed dimensions Tomorrow morning __________________ Brent W 66 short step 4 x 4

10-29-2018, 09:53 AM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Step side bed dimensions Like this?: http://67-72chevytrucks.com/vboard/a...1&d=1247425057 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-29-2018, 10:16 AM	#5
Brentwe Registered User Join Date: Aug 2018 Location: Chetwynd, BC Posts: 58	Re: Step side bed dimensions And to add o/s measures. 80 inch of side rails, 78 1/2 i/s , don't forget about the roll on the bull board. It's about 1 1/2 inches in. 58 1/2 wide on the rails. Not sure I could actually slide a 50 inch piece between the sides. My i/s measure is 48 5/8, so if it is a drop in, leave a bit of room. __________________ Brent W 66 short step 4 x 4 Last edited by Brentwe; 10-29-2018 at 10:28 AM.

10-29-2018, 11:50 AM	#6
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Step side bed dimensions thanks guys



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.