Nice Pull Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 11-02-2018, 11:49 PM

Doesn't miss a lick. This was at the Garrett County Fair in Maryland in '09

Dennis Nicholson 2nd Place Oulaw Class Garrett...

72 tigger · 11-03-2018, 08:03 AM

Looks like a solid truck- sounds good too

**special-K** · 11-03-2018, 08:45 PM

Looks good, too. Now I'm looking at other pullers. I like this Stepside

1972 Chevy Pulling - YouTube

outfield · 11-08-2018, 12:23 AM

That sound sends shivers down my spine!

I pulled for three years with a 69K20 short bed, stock 5800lb class back in the 80's. I loved beating the super stock class guys with their 1/2 tons and 3.08 gears.

**special-K** · 11-08-2018, 08:11 AM

I love that sound... that feeling! If everyone in the world could work together as well as all those engine parts the world would be a wonderful place!

Here's another very angry sounding one:

1969 Chevy Pulling Truck with Big Block - YouTube

GASoline71 · 11-08-2018, 11:42 AM

Awesome trucks! I miss seeing the truck pulls. They just aren't as prevalent here in the PNW anymore. There are some pullers in the area, but have to travel quite a ways to participate or watch.

Gary

**special-K** · 11-08-2018, 09:30 PM

It's mostly tractors around here, but the trucks are there, too. Seems all the pulling is biggest in the mid-west, truck and tractor.

Nudder:

Blown Injection Super Modified C10 Chevy 4x4 1st...

flashed · 11-08-2018, 09:37 PM

Those are Too Kool , never seen Pulling Trucks . We used to have Tractor Pulls years ago in stadiums in Atlanta but not in a long time now .

**Curtb1971** · 11-08-2018, 09:53 PM

Love the truck pull videos

I would go but we ain'ts got no's tractor/truck pulls round here. Here is what I think was an old tug boat I seen on a trip to Iowa a couple months ago? It's awesome seeing different variations and modifications of these old trucks

**special-K** · 11-09-2018, 01:48 AM

Probably a 2wd puller. Those are pretty cool, too

GASoline71 · 11-09-2018, 11:01 AM

2 Wheel pullers always did wheelstands pretty much through the entire run. Man I miss seeing the truck pulls!

Gary

fatbass · 11-09-2018, 04:57 PM

The sound of these engines seriously sends chills down my spine and makes the hair on my neck stand up. Always has.

Fidalgo3 · 11-09-2018, 06:07 PM

My puller in progress. Getting body and paint work this winter
I'd post a video if i knew how HAHAHA

**special-K** · 11-09-2018, 06:20 PM

The only way I know how is from You Tube. Did I see your truck on there?

Here is a 2wd rippin' it up

500 HP Chevy C10 2WD Racing Fuel Super Stock...

Fidalgo3 · 11-09-2018, 07:35 PM

https://www.youtube.com/watch?v=K5Ngw4Y3W6E

**65truckowner** · 11-09-2018, 08:13 PM

Nice !!

**special-K** · 11-10-2018, 08:30 AM

Hey, there ya go! Sounds and it pulled great!

I saw it once, but hadn't found it since.

A neat little tip: In that link code, if you simply take the 's' off of the 'https' it will show in your thread like the videos I posted, not just a link.

Fidalgo3 · 11-12-2018, 11:09 AM

Thanks!

**special-K** · 11-12-2018, 11:40 AM

Glad to share. I just learned that.

11-03-2018, 08:03 AM	#2
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,250	Re: Nice Pull Truck Looks like a solid truck- sounds good too

11-08-2018, 12:23 AM	#4
outfield Registered User Join Date: Apr 2016 Location: Portland, Or Posts: 387	Re: Nice Pull Truck That sound sends shivers down my spine! I pulled for three years with a 69K20 short bed, stock 5800lb class back in the 80's. I loved beating the super stock class guys with their 1/2 tons and 3.08 gears.

11-08-2018, 09:37 PM	#8
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Nice Pull Truck Those are Too Kool , never seen Pulling Trucks . We used to have Tractor Pulls years ago in stadiums in Atlanta but not in a long time now .

11-08-2018, 09:53 PM	#9
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Nice Pull Truck Love the truck pull videos I would go but we ain'ts got no's tractor/truck pulls round here. Here is what I think was an old tug boat I seen on a trip to Iowa a couple months ago? It's awesome seeing different variations and modifications of these old trucks Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

11-09-2018, 01:48 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Nice Pull Truck Probably a 2wd puller. Those are pretty cool, too __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-09-2018, 04:57 PM	#12
fatbass Registered User Join Date: May 2012 Location: South Ogden, Utah Posts: 172	Re: Nice Pull Truck The sound of these engines seriously sends chills down my spine and makes the hair on my neck stand up. Always has. __________________ '71 C/20 350/T350.

11-09-2018, 06:07 PM	#13
Fidalgo3 Registered User Join Date: Oct 2018 Location: Modesto Posts: 5	Re: Nice Pull Truck My puller in progress. Getting body and paint work this winter I'd post a video if i knew how HAHAHA Attached Images __________________ 1972 Chevy C10 350ci/M20 1972 GMC K2500 496ci/TH350/NP205 1986 GMC Jimmy 350ci/700r4/NP208 Last edited by Fidalgo3; 11-09-2018 at 06:12 PM.

11-09-2018, 07:35 PM	#15
Fidalgo3 Registered User Join Date: Oct 2018 Location: Modesto Posts: 5	Re: Nice Pull Truck https://www.youtube.com/watch?v=K5Ngw4Y3W6E __________________ 1972 Chevy C10 350ci/M20 1972 GMC K2500 496ci/TH350/NP205 1986 GMC Jimmy 350ci/700r4/NP208

11-09-2018, 08:13 PM	#16
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,316	Re: Nice Pull Truck Nice !! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

11-10-2018, 08:30 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Nice Pull Truck Hey, there ya go! Sounds and it pulled great! I saw it once, but hadn't found it since. A neat little tip: In that link code, if you simply take the 's' off of the 'https' it will show in your thread like the videos I posted, not just a link. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-12-2018 at 11:39 AM.

11-12-2018, 11:09 AM	#18
Fidalgo3 Registered User Join Date: Oct 2018 Location: Modesto Posts: 5	Re: Nice Pull Truck Thanks! __________________ 1972 Chevy C10 350ci/M20 1972 GMC K2500 496ci/TH350/NP205 1986 GMC Jimmy 350ci/700r4/NP208

11-12-2018, 11:40 AM	#19
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Nice Pull Truck Glad to share. I just learned that. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.