Quote:
Originally Posted by oldman3
Paintman, after looking at your first pic, and then checking Willwood prop valve. You have yours plumbed wrong. The two top line, #1 is FI or front inlet #2 is RI or rear inlet. The bottom 3 are 1 & 2 FO or front outlet (one for left side and one for right side) and 3 is RO or rear outlet. You do not have anything in #3 at bottom, it's empty. The valve controls the fluid in #3, can't see the size but it apprears to be larger. On the pic I saw from Wilwood each outlet was marked. Hope this helps...Jim
|
You are looking at the prop valve before the plumbing was complete. All the lines are installed in the proper ports!
11-13-2018, 07:31 AM
Threaded Mode