SC WTB 67-68 Gauge bezel ONLY - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HIGHWAY BY THE SEA** · 11-08-2018, 01:25 PM

I WTB a 67-68 seven gauge bezel with no cracks that is in at least restorable condition to adapt my 72 gauge pod to my 67 GMC. Anyone have one lying around that will not cost me my firstborn? The LMC one seems a bit steep.

54Caddy · 11-08-2018, 03:16 PM

67 and 68 are different. 67 only says wiper. 68 says wiper/washer.

**HIGHWAY BY THE SEA** · 11-08-2018, 04:08 PM

Quote:

Originally Posted by 54Caddy

67 and 68 are different. 67 only says wiper. 68 says wiper/washer.

Yes, I know, and thanks for the info. It is the configuration of the wipers and light switch that I am wanting, so 68 will work.
BTW that HEI you sold me works GREAT!

**michael bustamante** · 11-08-2018, 04:53 PM

do you want the 3 guage cluster or the 7?

**HIGHWAY BY THE SEA** · 11-08-2018, 05:29 PM

Quote:

Originally Posted by michael bustamante

do you want the 3 guage cluster or the 7?

Seven gauge

**michael bustamante** · 11-08-2018, 06:07 PM

don't have that one for you bud. sorry. mines clean but missing a small piece in the silver border part.
my 3 guage 67 is cherry

**HIGHWAY BY THE SEA** · 11-08-2018, 06:39 PM

Quote:

Originally Posted by michael bustamante

don't have that one for you bud. sorry. mines clean but missing a small piece in the silver border part.
my 3 guage 67 is cherry

Thanks for looking. A tall order, I know!

**daddymoo2** · 11-08-2018, 08:32 PM

Here are some pics of the 2 that I have. Can get better pics. Also will sell just the bezel. Thanks Don

**Curtb1971** · 11-08-2018, 08:35 PM

I have a restored OEM 68 bezel if you want to go that route. $125 shipped/insured and wrapped to drop from a plane

**TBONE1964** · 11-08-2018, 11:59 PM

Here are two that I have.

The blue one was bought and painted by a prior customer. It is a reproduction bezel I would take $50 shipped

The other is a factory OE 68 bezel. No cracks around any screw holes but has very minor damage near lower right screw hole Looks like a cutter got a tad close. $40.00 shipped.

I also have another factory 68 OE bezel that has been painted red for a 68 GMC by the customer. $30.00 shipped. I will have to dig it out for a photo.

I would go with CurtB's bezel myself. he does great work on these and his price is very fair for the attention to detail he gives.

Tom

**HIGHWAY BY THE SEA** · 11-09-2018, 12:46 AM

Quote:

Originally Posted by daddymoo2

Here are some pics of the 2 that I have. Can get better pics. Also will sell just the bezel. Thanks Don

How much for just the bezel?

**HIGHWAY BY THE SEA** · 11-09-2018, 11:05 AM

Quote:

Originally Posted by Curtb1971

I have a restored OEM 68 bezel if you want to go that route. $125 shipped/insured and wrapped to drop from a plane

That is a real beauty Curt, but finances force me to pass. I need a cheaper one. Thanks though!

**HIGHWAY BY THE SEA** · 11-09-2018, 11:06 AM

Quote:

Originally Posted by TBONE1964

Here are two that I have.

The blue one was bought and painted by a prior customer. It is a reproduction bezel I would take $50 shipped

The other is a factory OE 68 bezel. No cracks around any screw holes but has very minor damage near lower right screw hole Looks like a cutter got a tad close. $40.00 shipped.

I also have another factory 68 OE bezel that has been painted red for a 68 GMC by the customer. $30.00 shipped. I will have to dig it out for a photo.

I would go with CurtB's bezel myself. he does great work on these and his price is very fair for the attention to detail he gives.

Tom

Hey TBone! I bought my gauge pod for my 68 stepside from you! I would like to see a picture of the red one you mentioned.

**TBONE1964** · 11-10-2018, 01:13 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Hey TBone! I bought my gauge pod for my 68 stepside from you! I would like to see a picture of the red one you mentioned.

Here you go sir. No cracks around any screw hole. Paint has been redone in the past. Not by me.

I wanted to add, to avoid confusion that the cluster itself is not included but it is for sale.

This is for the bezel only.

**HIGHWAY BY THE SEA** · 11-10-2018, 01:38 PM

Quote:

Originally Posted by TBONE1964

Here you go sir. No cracks around any screw hole. Paint has been redone in the past. Not by me.

Yes, I will take that bezel. I cannot send you a PM for some reason...?

**TBONE1964** · 11-10-2018, 08:52 PM

Quote:

Originally Posted by HIGHWAY BY THE SEA

Yes, I will take that bezel. I cannot send you a PM for some reason...?

You can send email to me at tbonegarris@yahoo.com

**HIGHWAY BY THE SEA** · 11-10-2018, 10:35 PM

I want to thank all who responded to my ad! Those bezels are all GREAT, and I may do business with some of you in the future.

**TBONE1964** · 11-14-2018, 12:44 AM

Quote:

Originally Posted by HIGHWAY BY THE SEA

I want to thank all who responded to my ad! Those bezels are all GREAT, and I may do business with some of you in the future.

Bezel is on the way sir. You should see it on Thursday. Let me know if not and I can track it.

Thank you again,
Tom

11-08-2018, 01:25 PM	#1
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	WTB 67-68 Gauge bezel ONLY I WTB a 67-68 seven gauge bezel with no cracks that is in at least restorable condition to adapt my 72 gauge pod to my 67 GMC. Anyone have one lying around that will not cost me my firstborn? The LMC one seems a bit steep. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion Last edited by HIGHWAY BY THE SEA; 11-08-2018 at 01:51 PM.

11-08-2018, 03:16 PM	#2
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: WTB 67-68 Gauge bezel ONLY 67 and 68 are different. 67 only says wiper. 68 says wiper/washer. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-08-2018, 04:53 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB 67-68 Gauge bezel ONLY do you want the 3 guage cluster or the 7? __________________ 1967custom

11-08-2018, 06:07 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: WTB 67-68 Gauge bezel ONLY don't have that one for you bud. sorry. mines clean but missing a small piece in the silver border part. my 3 guage 67 is cherry __________________ 1967custom Last edited by michael bustamante; 11-08-2018 at 06:15 PM.

11-08-2018, 08:32 PM	#8
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,575	Re: WTB 67-68 Gauge bezel ONLY Here are some pics of the 2 that I have. Can get better pics. Also will sell just the bezel. Thanks Don Attached Images

11-08-2018, 08:35 PM	#9
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: WTB 67-68 Gauge bezel ONLY I have a restored OEM 68 bezel if you want to go that route. $125 shipped/insured and wrapped to drop from a plane Attached Images __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

11-08-2018, 11:59 PM	#10
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,262	Re: WTB 67-68 Gauge bezel ONLY Here are two that I have. The blue one was bought and painted by a prior customer. It is a reproduction bezel I would take $50 shipped The other is a factory OE 68 bezel. No cracks around any screw holes but has very minor damage near lower right screw hole Looks like a cutter got a tad close. $40.00 shipped. I also have another factory 68 OE bezel that has been painted red for a 68 GMC by the customer. $30.00 shipped. I will have to dig it out for a photo. I would go with CurtB's bezel myself. he does great work on these and his price is very fair for the attention to detail he gives. Tom Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-10-2018, 10:35 PM	#17
HIGHWAY BY THE SEA Senior Member Join Date: Nov 2012 Location: BY THE CAROLINA SEA Posts: 922	Re: WTB 67-68 Gauge bezel ONLY I want to thank all who responded to my ad! Those bezels are all GREAT, and I may do business with some of you in the future. __________________ FRANKENTRUCK 1981 Chevrolet C10 Shortbed Stepside GRANDTRUCK 1968 Chevrolet C10 Stepside Longbed http://67-72chevytrucks.com/vboard/s...d.php?t=584617 PROJECT JIGSAW 1967 GMC C3500 GREAT WHITE 1986 Blazer M1009 454 engine w/700R4 transmission gas conversion



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.