Manual trans question

[Zoomad75]

A late round pattern 205 bolts up to a nv4500 without the uber-expensive AA adaptor. Plus you don't have to chop 4" off of the nv4500 to make it work either.

The a883 od trans was the oddball car trans that was sold in the Squares. It was basically a 3 speed manual with OD. Wasn't sure is was available in the 4wd trucks though.

[sweetk30]

Originally Posted by Zoomad75

A late round pattern 205 bolts up to a nv4500 without the uber-expensive AA adaptor. Plus you don't have to chop 4" off of the nv4500 to make it work either.

The a883 od trans was the oddball car trans that was sold in the Squares. It was basically a 3 speed manual with OD. Wasn't sure is was available in the 4wd trucks though.

if i recall 100% you still need to swap to a short 32 spline input gear over the gm round 6 long input . otherwise the spacer is still needed to let it bolt up from the length of the input gear .

[SunSoaked]

Originally Posted by sweetk30

if i recall 100% you still need to swap to a short 32 spline input gear over the gm round 6 long input . otherwise the spacer is still needed to let it bolt up from the length of the input gear .

True statement Sweetk30. I have two of them. 1.625 thick.

[Zoomad75]

Originally Posted by sweetk30

if i recall 100% you still need to swap to a short 32 spline input gear over the gm round 6 long input . otherwise the spacer is still needed to let it bolt up from the length of the input gear .

Pretty easy fix with a phone call to ORD.

[sweetk30]

Originally Posted by Zoomad75

Pretty easy fix with a phone call to ORD.

yes thats true sir . just clearing up the not stock for stock bolt up no adapter thing for others searching later .