TX WTB: TH350 dust cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70K10Hunter · 11-25-2018, 02:25 PM

Looking for a dust cover for my build whats available out there?

sweetk30 · 11-25-2018, 02:39 PM

you need to specify 4 bolt tin or 6 bolt aluminum for 4x4 type use .

good luck in the hunt .

70K10Hunter · 11-25-2018, 03:40 PM

Well looking at trans it has 4 mounting holes in housing. cover was missing when I got it. got pics of aluminum one? mine is a 4x4.

john@thepier · 11-25-2018, 04:42 PM

I have a plastic cover, maybe what your looking for or a aluminum

sweetk30 · 11-25-2018, 05:51 PM

case is cast a bit different on most with 4 bolt holes / tin cover . some tho i have sen were 4x4 case just never drilled / tapped holes for the 6 bolt .

its NOT a deal breaker for your trans to be the reg case and not a 4x4 case .

70K10Hunter · 11-25-2018, 09:49 PM

Quote:

Originally Posted by sweetk30

case is cast a bit different on most with 4 bolt holes / tin cover . some tho i have sen were 4x4 case just never drilled / tapped holes for the 6 bolt .

its NOT a deal breaker for your trans to be the reg case and not a 4x4 case .

I believe the trans in my truck is a salvage yard replacement the bolts to the pump have been painted with marking paint an identifier from back in the day? never the less could I use an aluminum cover? will it bolt up to the 4 bolt housing without any clearance issues?

70K10Hunter · 11-25-2018, 09:52 PM

Quote:

Originally Posted by john@thepier

I have a plastic cover, maybe what your looking for or a aluminum

pending a question I posted in above post I might be interested in the aluminum cover. PM me a price if available.

70K10Hunter · 11-26-2018, 08:29 PM

Quote:

Originally Posted by john@thepier

I have a plastic cover, maybe what your looking for or a aluminum

Are you looking to sell the aluminum one?

john@thepier · 11-26-2018, 08:43 PM

I only have a 2wd 400 trans here, so I wanted to confirm if the aluminum cover fits a 350
I can get the aluminum cover to fit the 400 but the holes aren’t working and the plastic cover dose not fit the 400
Maybe get a measurement of your trans holes, I think the plastic one is correct, also I found a metal cover here today that I believe is a 350 also, both the metal and plastic are 4 mounting holes

70K10Hunter · 11-26-2018, 09:21 PM

I would be interested in the steel or the aluminum. are the bolt holes the same on the aluminum as the steel?

john@thepier · 11-26-2018, 10:04 PM

The plastic and steel covers have the same mounting holes pattern and neither fit my 400.
The aluminum cover fits my 400 but my 400 is not drilled in the same spots as the cover.
I’ll wipe down the steel cover and get you a picture and price to ship.

john@thepier · 11-26-2018, 10:07 PM

Ps I have only owned GM vehicles in my tinkering days and have only had 350 and 400 transmissions so I know what I have is for your 350

john@thepier · 11-27-2018, 07:29 PM

Hunter I had a crazy day so NO time to clean the cover, I am unsure how to use a UPS shipping calculator but the tightest box I could fit it in is
14”L
15”W
9 1/2 H
Maybe weight at 3#
Maybe you have an idea how to figure shipping
Otherwise I can get a quote tomorrow

70K10Hunter · 11-27-2018, 08:56 PM

Hey John just now getting home to look at your post, 7:00-pm CT my zip is 78666 you will need ship from zip and ship to zip. I will check out UPS
Whats your zip?

john@thepier · 11-27-2018, 08:59 PM

53147 and I will sell the cover for $15 + shipping

70K10Hunter · 11-27-2018, 09:07 PM

from what I can find it will be about $12.

70K10Hunter · 11-27-2018, 09:08 PM

just seen your post. payment method?

john@thepier · 11-27-2018, 09:09 PM

PP work for you?

john@thepier · 11-27-2018, 09:30 PM

I have to go to UPS tomorrow and ship some other parts.
If you like, pm me this evening your name and address and I will just send this off to you and report back what it truly was to ship and we can square up tomorrow evening.
John

70K10Hunter · 11-27-2018, 09:45 PM

works for me.

blindbug · 11-28-2018, 11:34 AM

John, put me on a waitlist if K10 decides not to purchase.

70K10Hunter · 11-28-2018, 09:08 PM

Payment sent.
Thanks John

11-25-2018, 02:25 PM	#1
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	WTB: TH350 dust cover Looking for a dust cover for my build whats available out there?

11-25-2018, 02:39 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB: TH350 dust cover you need to specify 4 bolt tin or 6 bolt aluminum for 4x4 type use . good luck in the hunt . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

11-25-2018, 03:40 PM	#3
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover Well looking at trans it has 4 mounting holes in housing. cover was missing when I got it. got pics of aluminum one? mine is a 4x4.

11-25-2018, 04:42 PM	#4
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover I have a plastic cover, maybe what your looking for or a aluminum Attached Images

11-25-2018, 05:51 PM	#5
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: WTB: TH350 dust cover case is cast a bit different on most with 4 bolt holes / tin cover . some tho i have sen were 4x4 case just never drilled / tapped holes for the 6 bolt . its NOT a deal breaker for your trans to be the reg case and not a 4x4 case . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

11-26-2018, 08:43 PM	#9
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover I only have a 2wd 400 trans here, so I wanted to confirm if the aluminum cover fits a 350 I can get the aluminum cover to fit the 400 but the holes aren’t working and the plastic cover dose not fit the 400 Maybe get a measurement of your trans holes, I think the plastic one is correct, also I found a metal cover here today that I believe is a 350 also, both the metal and plastic are 4 mounting holes

11-26-2018, 09:21 PM	#10
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover I would be interested in the steel or the aluminum. are the bolt holes the same on the aluminum as the steel?

11-26-2018, 10:04 PM	#11
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover The plastic and steel covers have the same mounting holes pattern and neither fit my 400. The aluminum cover fits my 400 but my 400 is not drilled in the same spots as the cover. I’ll wipe down the steel cover and get you a picture and price to ship.

11-26-2018, 10:07 PM	#12
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover Ps I have only owned GM vehicles in my tinkering days and have only had 350 and 400 transmissions so I know what I have is for your 350

11-27-2018, 07:29 PM	#13
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover Hunter I had a crazy day so NO time to clean the cover, I am unsure how to use a UPS shipping calculator but the tightest box I could fit it in is 14”L 15”W 9 1/2 H Maybe weight at 3# Maybe you have an idea how to figure shipping Otherwise I can get a quote tomorrow Attached Images

11-27-2018, 08:56 PM	#14
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover Hey John just now getting home to look at your post, 7:00-pm CT my zip is 78666 you will need ship from zip and ship to zip. I will check out UPS Whats your zip?

11-27-2018, 08:59 PM	#15
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover 53147 and I will sell the cover for $15 + shipping

11-27-2018, 09:07 PM	#16
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover from what I can find it will be about $12.

11-27-2018, 09:08 PM	#17
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover just seen your post. payment method?

11-27-2018, 09:09 PM	#18
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover PP work for you?



Register or Log In To remove these advertisements.

11-27-2018, 09:30 PM	#19
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: WTB: TH350 dust cover I have to go to UPS tomorrow and ship some other parts. If you like, pm me this evening your name and address and I will just send this off to you and report back what it truly was to ship and we can square up tomorrow evening. John

11-27-2018, 09:45 PM	#20
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover works for me.

11-28-2018, 11:34 AM	#21
blindbug Registered User Join Date: Oct 2017 Location: Louisville, KY Posts: 186	Re: WTB: TH350 dust cover John, put me on a waitlist if K10 decides not to purchase.

11-28-2018, 09:08 PM	#22
70K10Hunter Registered User Join Date: Jun 2012 Location: Hill Country Posts: 435	Re: WTB: TH350 dust cover Payment sent. Thanks John

Register or Log In To remove these advertisements.