79 rear end into 65? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 12-08-2018, 09:35 AM

Are you planning on dropping it? and how much?
You can go aftermarket like POL - https://www.performanceonline.com/60...pension-parts/
A 65/66 will have a better frame mount for the panhard bar IMO for clearance if your dropping it along with the POL bar.
There is one other company I used previously, they make a great product but it hits the frame on the P-side when dropped: http://67-72chevytrucks.com/vboard/s...1&postcount=31

bigmoe · 12-08-2018, 03:38 PM

Quote:

Originally Posted by The Rocknrod

Are you planning on dropping it? and how much?
You can go aftermarket like POL - https://www.performanceonline.com/60...pension-parts/
A 65/66 will have a better frame mount for the panhard bar IMO for clearance if your dropping it along with the POL bar.
There is one other company I used previously, they make a great product but it hits the frame on the P-side when dropped: http://67-72chevytrucks.com/vboard/s...1&postcount=31

Only a 3 to 4” drop with Jeep coils.

12-08-2018, 09:35 AM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 79 rear end into 65? Are you planning on dropping it? and how much? You can go aftermarket like POL - https://www.performanceonline.com/60...pension-parts/ A 65/66 will have a better frame mount for the panhard bar IMO for clearance if your dropping it along with the POL bar. There is one other company I used previously, they make a great product but it hits the frame on the P-side when dropped: http://67-72chevytrucks.com/vboard/s...1&postcount=31 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.