CA Parts you want'em and I need'em gone.

[Mike_The_Grad]

All kinds of parts. I have more but dont have pics of them yet. Shipping on your dime.

O.E.M. front sway bar bushing retainers. These fit the factory size front sway bar. 1 1/16"? $10

Set of points for points type distributor. Brand new. And that's all I know about them. $20

Core support frame horn. I had this bolted on passenger side of my 72 c10 for a while after a accident ripped my original off. I believe this one is for 67-68(smaller diameter hole for core support cushion.) $10

Inner fender to core support gusset. Upper. I think I only have the one. Its straight though. $10

[CG]

Hey Mike Forum rules state you must post prices on items for sale.

[Mike_The_Grad]

More parts.

Brand new 3/8" metal fuel supply line for 72 c10 with 350 engine. This one is ran along the frame rail to the front of the truck. $20

Newer Divorced choke coil and cover for Quadrajet carb on small block motors. This is for the O.E. iron intake manifold. The coil moves UP and AWAY from the intake manifold as it warms up. (Some pull down when heated.) $25

O.E.M. divorced choke coil and cover for Quadrajet carb mounted on O.E. iron intake on small block motors. This one also moves up and away from intake manifold when warm. $20

Brand new in package 3-Row Radiator cushion. I have 2 of these in package. $5 each

[Mike_The_Grad]

I have more parts, but no pictures yet. I can get some this weekend and post em up though. Here's a short list off the top of my head.

I have 3 or 4 O.E.M. blower motors for Non-A/C heater boxes 67-72. Not sure if they are functional. But pretty sure they do work. $20 each

Couple of squirrel cages for heater blower motor, various conditions. $10 each

Brand new in box Aluminum Heater Core for Non-A/C heater boxes 67-72. $50

Edlebrock 2101 Performer intake manifold for small block. It's a little dirty on the outside, but the underside and intake runners look great. It has a crack on the front outermost driver side bolt hole but does not leak I have some J/B weld on it and works fine. This is for a spreadbore carb. $50

Edlebrock divorced choke with cover and rod for quadrajet carb mounted on performer intake manifold. Small block. This coil moves Up and AWAY from intake manifold and is designed to be used on the edlebrock intake manifold only. $25

O.E.M. 72 bench seat adjusters/sliders. Work great. $45

1972 black vinyl STD bench seat. Needs to be reupholstered and new foam. But I ran it no problem. I have fabric covering the back rest of the seat. And taped the drivers side seat pretty well. $100

Factory bottle jack mount/hold down for 72 c10 (NO JACK OR HANDLE. JUST BRACKETS AND SPRING.) $15

Aftermarket O.E.R. Detent cable for th350. Brand New. Has correct style locking tabs for adjuster, and slot for stud type retainer at carb. $20

Aftermarket chrome upper alternator bracket for LONG water pump. Mounts alternator on PASSENGER side of engine. Brand new never installed. $20

69-72 hood hinges. One set is O.E.M. from my 72 c10, springs are still good, not sloppy in the hinge pins. $40

Then another set with mismatched springs. One skinny one fat. They work fine. $30

I have 3 hood release assemblies for 71-72 style front ends. $25 each.

[Mike_The_Grad]

CG
thanks for the reminder I appreciate it. I'll do that right now.

[Mike_The_Grad]

More parts.

Comp Cam "Super Locks" 10° Valve locks 11/32" for small block iron heads and hydraulic flat tappet camshaft. $20

Delco-Remy R11-12V Horn Relay USED. $10

[BobW]

I'll take the sway bar bushing retainers. Please send me payment info.

[68bowtie]

I will take this:

O.E.M. divorced choke coil and cover for Quadrajet carb mounted on O.E. iron intake on small block motors. This one also moves up and away from intake manifold when warm. $20

[Mike_The_Grad]

Bobw, zip code 60089?

[Mike_The_Grad]

68bowtie PM sent.

[Mike_The_Grad]

I will post more parts later today as well as pictures of the parts I already have listed.

[Mike_The_Grad]

Pictures of parts I listed already.

[Mike_The_Grad]

More pics.
**EDIT**

This alternator bracket is NOT for mounting the alternator to the passenger side of the engine. But I do believe it is for a LONG water pump application. I dont have the original packaging anymore. Price still stands at $20.

[Mike_The_Grad]

Pics of Edelbrock intake manifold and parts.

$75 for intake manifold, along with divorced choke, choke cover, and choke rod. I had to buy all these parts individually. Cost me over $100. Need'em gone. Help me, help you.

[Mike_The_Grad]

TH350 detent cable. O.E.R. Brand.

[Mike_The_Grad]

Found more parts!!

69-72 NON A/C heater control shell. O.E.M.
DOES NOT HAVE LEVERS, SPEED SELECTOR SWITCH, LIGHTBULB, OR PIGTAIL. THIS IS ONLY THE HOUSING. $10

Edelbrock adapter plate for mounting irregular spreadbore carburetor mounting flange to standard spreadbore intake manifolds.

Edelbrock part #2731. $15

This plate is absolutely necessary if you plan on mounting a Quadrajet carburetor that came mounted on a stock iron intake with the Exhaust heat crossover channel that runs under the front of the carburetor. (A.K.A. "Hot Slot" intake manifold. ) Without this plate you will experience a massive vacuum leak that is pretty difficult to find. This gave me the runaround for quite some time, nowhere in the forums or even edelbrock's catalog do they mention this adapter plate for this particular combination. I found it on their website in really small print on a page that you wouldn't even think to look for this. I only did by pure luck. ( I have a thread posted about it on here. "Just about on cloud 9")

[Oddfire]

How much to ship the TH350 detent cable...zip code 22630. Jamie

[BobW]

Hi,
Zip code is 60069.

Thanks,

BobW

[Mike_The_Grad]

Bobw, PM sent

[rechinca]

How much to shop that fuel line to 95687?

[GJB]

I’d take both squirrel cages as long as they are not eaten

[Mike_The_Grad]

Oddfire and rechinca,
I will get you a price this evening.


GJB,
One of them is eaten I just noticed. The other one is in good condition.

[Mike_The_Grad]

Squirrel cages.

[Mike_The_Grad]

Oddfire, $26.70 gets it to you.

[Madkidd007]

Originally Posted by Mike_The_Grad

69-72 hood hinges. One set is O.E.M. from my 72 c10, springs are still good, not sloppy in the hinge pins. $40

I’ll take a pair pending shipping cost to 30605