NJ 2- 20x10 Polished 1 piece TT II wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 09-04-2018, 11:13 AM

I have 2 Polished 1 piece American Racing 20x10 TT wheels for sale. They are 5x5 lug pattern with 5.75” backspacing. The wheels are basically brand new as they were only used for mockup. They did have tires mounted to them but those were switched over to the current wheels on my burb! They are boxed up and ready to go.

SOLD

Bennett68C10 · 09-11-2018, 09:38 AM

ttt

f.flujan · 09-11-2018, 09:52 AM

im running stock rearend and c-notch on air bags. Will these fit fine with no modifications?
I like the tucked look.

Bennett68C10 · 09-11-2018, 11:41 AM

Quote:

Originally Posted by f.flujan

im running stock rearend and c-notch on air bags. Will these fit fine with no modifications?
I like the tucked look.

Depends on what year your rear end is, whether it’s the narrow 67-70 version or wider 70-72 version. If you have the narrow rear, they won’t clear the inside of your wheel wells without spacers because those rears are something like .75” narrower per side! If you have the later wider rear, they should clear!

f.flujan · 09-11-2018, 04:30 PM

yeah I'm running the stocl 12 bolt that came with the 68. So if these dont fit, backspacing should be how much for my application. Thx for the response and help

f.flujan · 09-11-2018, 04:31 PM

Nice ride you got goin. checked out ur build

Bennett68C10 · 09-11-2018, 06:31 PM

Quote:

Originally Posted by f.flujan

yeah I'm running the stocl 12 bolt that came with the 68. So if these dont fit, backspacing should be how much for my application. Thx for the response and help

Quote:

Originally Posted by f.flujan

Nice ride you got goin. checked out ur build

Thanks, sounds like you have the same rear I’m running in my Burb so these wheels won’t fit properly without use of a spacer. They just have too much backspacing to use with the narrow rear. Typically around 5” of backspacing works good on a 10” wheel with the narrow rear but it’s always recommended that you measure you truck to make sure. Also the problem with 5” BS on a 10” wheel is you usually have to go with a custom wheel to get it. Which means a lot of $$$.

Bennett68C10 · 09-28-2018, 10:41 AM

TTT, still forsale

Bennett68C10 · 12-11-2018, 03:36 PM

TTT, still have these for sale. Boxed up and ready to go!

09-04-2018, 11:13 AM	#1
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	2- 20x10 Polished 1 piece TT II wheels I have 2 Polished 1 piece American Racing 20x10 TT wheels for sale. They are 5x5 lug pattern with 5.75” backspacing. The wheels are basically brand new as they were only used for mockup. They did have tires mounted to them but those were switched over to the current wheels on my burb! They are boxed up and ready to go. SOLD Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10 Last edited by Bennett68C10; 12-28-2018 at 12:27 PM.

09-11-2018, 09:38 AM	#2
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 2- 20x10 Polished 1 piece TT II wheels ttt __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

09-11-2018, 09:52 AM	#3
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: 2- 20x10 Polished 1 piece TT II wheels im running stock rearend and c-notch on air bags. Will these fit fine with no modifications? I like the tucked look.

09-11-2018, 04:30 PM	#5
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: 2- 20x10 Polished 1 piece TT II wheels yeah I'm running the stocl 12 bolt that came with the 68. So if these dont fit, backspacing should be how much for my application. Thx for the response and help

09-11-2018, 04:31 PM	#6
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: 2- 20x10 Polished 1 piece TT II wheels Nice ride you got goin. checked out ur build

09-28-2018, 10:41 AM	#8
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 2- 20x10 Polished 1 piece TT II wheels TTT, still forsale __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-11-2018, 03:36 PM	#9
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 2- 20x10 Polished 1 piece TT II wheels TTT, still have these for sale. Boxed up and ready to go! __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.