steering column bracket screws - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hdixon · 12-07-2018, 06:54 PM

Do anyone have are can tell me what size screws that go into the steering column bracket that mounts under the bottom on the dash also the screws that hole the seal retainer bracket which is located on the fire wall inside the cab any help would be great I just replace my steering with a Ididit tilt wheel and these screws are missing

notsolo · 12-07-2018, 07:32 PM

2 bolts on the U bracket are 1/2" head 5/16 -18 about 1 1/4" long. If thats the ones you mean.

hdixon · 12-07-2018, 08:23 PM

Quote:

Originally Posted by notsolo

2 bolts on the U bracket are 1/2" head 5/16 -18 about 1 1/4" long. If thats the ones you mean.

I need the screws 2 that hole the bracket under dash bezel also the 2 that holes that rubber seal in place where the column exit the firewall from inside the cab near the floor

**71CHEVYSHORTBED402** · 12-08-2018, 02:54 AM

From my notes. Unfortunately I can't offer a thread count on tap screws.

The steering column cover mounts to the bottom of the dashboard using two phillips tap screws. The screw threads are 1/4" x 11/16". The cover goes over the rubber column cover on the gauge cluster bezel.

The toe pan cover mounts over the toe pan seal. The cover mounts to the toe pan using two (GR 5) 5/16" flange tap screws. The screw threads are #10 x 1/2".

hdixon · 12-08-2018, 11:18 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

From my notes. Unfortunately I can't offer a thread count on tap screws.

The steering column cover mounts to the bottom of the dashboard using two phillips tap screws. The screw threads are 1/4" x 11/16". The cover goes over the rubber column cover on the gauge cluster bezel.

The toe pan cover mounts over the toe pan seal. The cover mounts to the toe pan using two (GR 5) 5/16" flange tap screws. The screw threads are #10 x 1/2".

Thank you these are hard to fine LMC has the ones for the rubber seal near the floor but not the ones for under dash bezel

UniqueOdyssey68 · 12-12-2018, 05:46 PM

Looking for this too, thx! I just ordered other steering column bracket stuff from LMC, they do have screws for steering column cover/bracket underdash - #30-0536.
Misplaced or accidentally threw out old original stuff long ago..

I'm mocking/installing Flaming River column soon, ordered - COLUMN/FLOOR SEAL RETAINER, LOWER STEERING COLUMN BRACKET (outside firewall), COVER PLATE-STEERING COLUMN

Think I'm still missing a "U" shaped bracket, and "flat" type bracket for under dash, not sure.
What keeps the column from falling down underneath the dash??

12-07-2018, 07:32 PM	#2
notsolo Registered User Join Date: Apr 2008 Location: Md Posts: 2,456	Re: steering column bracket screws 2 bolts on the U bracket are 1/2" head 5/16 -18 about 1 1/4" long. If thats the ones you mean. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=635605

12-08-2018, 02:54 AM	#4
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,188	Re: steering column bracket screws From my notes. Unfortunately I can't offer a thread count on tap screws. The steering column cover mounts to the bottom of the dashboard using two phillips tap screws. The screw threads are 1/4" x 11/16". The cover goes over the rubber column cover on the gauge cluster bezel. The toe pan cover mounts over the toe pan seal. The cover mounts to the toe pan using two (GR 5) 5/16" flange tap screws. The screw threads are #10 x 1/2". __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

12-12-2018, 05:46 PM	#6
UniqueOdyssey68 Registered User Join Date: Mar 2018 Location: Idaho Posts: 73	Re: steering column bracket screws Looking for this too, thx! I just ordered other steering column bracket stuff from LMC, they do have screws for steering column cover/bracket underdash - #30-0536. Misplaced or accidentally threw out old original stuff long ago.. I'm mocking/installing Flaming River column soon, ordered - COLUMN/FLOOR SEAL RETAINER, LOWER STEERING COLUMN BRACKET (outside firewall), COVER PLATE-STEERING COLUMN Think I'm still missing a "U" shaped bracket, and "flat" type bracket for under dash, not sure. What keeps the column from falling down underneath the dash?? __________________ - long term project '68 C10 true shortbed! Resto-mod. LS swap. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=769919 "I've still kept this project truck when anyone else would've given up and sold it as is. Giving up is easy, staying the course is part of life's journey" ___________________________________________ '68 C10 true shortbed, LS swap restomod. '03 Z71 daily, '63 AMC Rambler V8 survivor Last edited by UniqueOdyssey68; 12-12-2018 at 05:47 PM. Reason: hyperlink add

12-07-2018, 06:54 PM	#1
hdixon Registered User Join Date: Aug 2016 Location: Plantation, Fl Posts: 357	steering column bracket screws Do anyone have are can tell me what size screws that go into the steering column bracket that mounts under the bottom on the dash also the screws that hole the seal retainer bracket which is located on the fire wall inside the cab any help would be great I just replace my steering with a Ididit tilt wheel and these screws are missing



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.