Canada Looking for solid steel 2.5" exhaust donut gaskets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewychevy67 · 12-19-2018, 07:03 PM

I would like to find a pair of new 2.5" exhaust donut flange gaskets. Must be solid metal No fiber crap ones. Let me know if you have some or if anyone knows where I can find a pair please. Thanks in advance. Rod.

**anew4961** · 12-19-2018, 08:33 PM

Quote:

Originally Posted by chewychevy67

I would like to find a pair of new 2.5" exhaust donut flange gaskets. Must be solid metal No fiber crap ones. Let me know if you have some or if anyone knows where I can find a pair please. Thanks in advance. Rod.

check rock auto i just bought 2

**70STOVEBOLT** · 12-19-2018, 11:03 PM

Rod, I may have a pair, I will look tomorrow.

chewychevy67 · 12-19-2018, 11:32 PM

I purchased 2 from rock auto. Thanks for that!

**70STOVEBOLT** · 12-19-2018, 11:47 PM

Ok glad you found them

**PDXk5** · 12-20-2018, 01:31 AM

Corvette Central sells them.

https://www.corvettecentral.com/c3-6...21%26count%3d9

chewychevy67 · 12-20-2018, 12:04 PM

I actually bought those and they are not hard like my Nos 2" Ramhorn ones. They look layered like the fiber ones. Not what I was hoping for. If I press hard with my fingernail it makes a mark. If it was solid steel i should not be able to do that. 70STOVEBOLT please post pictures of yours. I may take them as well.

**PDXk5** · 12-20-2018, 10:38 PM

Quote:

Originally Posted by chewychevy67

I actually bought those and they are not hard like my Nos 2" Ramhorn ones. They look layered like the fiber ones. Not what I was hoping for. If I press hard with my fingernail it makes a mark. If it was solid steel i should not be able to do that. 70STOVEBOLT please post pictures of yours. I may take them as well.

Hmm, that's disappointing. I plan on going the route of 2.5 inch ram horns and was thinking I had a source for the donuts. Thanks for clarifying. I wouldn't want to purchase them either.

70STOVEBOLT, you wouldn't happen to have two sets for sale would you?

**anew4961** · 12-20-2018, 11:23 PM

Quote:

Originally Posted by chewychevy67

I would like to find a pair of new 2.5" exhaust donut flange gaskets. Must be solid metal No fiber crap ones. Let me know if you have some or if anyone knows where I can find a pair please. Thanks in advance. Rod.

MAHLE F7139S Sintered Metal Info
e. Seal Ring Type "B"; with 2.5in Pipe; Sintered Metal; Manifold to Exhaust Pipe
this is rock auto part number the have them on close out

chewychevy67 · 12-20-2018, 11:33 PM

I did purchase a few from rock auto at that exact part number. When I get them I will post pictures. The corvette central one said metal as well so now I'm not sure. That's why if 70 stove bolt has the real metal ones I want to make sure I get a set. Hate the cheap fiber ones.

**70STOVEBOLT** · 12-20-2018, 11:36 PM

The ones I have are Mahle, I can post pics tomorrow. I only have one set I think.

chewychevy67 · 12-20-2018, 11:56 PM

I'll let pdxk5 have the ones 70STOVEBOLT has if he wants as he needs them as well. I will see what I get from rock auto 1st.

**PDXk5** · 12-21-2018, 12:25 AM

Quote:

Originally Posted by anew4961

MAHLE F7139S Sintered Metal Info
e. Seal Ring Type "B"; with 2.5in Pipe; Sintered Metal; Manifold to Exhaust Pipe
this is rock auto part number the have them on close out

These look good from the photos. Chewy let me know if they are solid when yours arrive.

**70STOVEBOLT** · 12-21-2018, 09:24 AM

The ones I have are the F7139S which have been discontinued by Mahle, they only offer the fiber type now. I thought I had an unused set but they are slightly used, I ran them with the manifolds for about 500 miles then switched to headers. If anyone is interested let me know and I will get pics.

**PDXk5** · 12-21-2018, 03:03 PM

I'm interested. Please post pics.

**70STOVEBOLT** · 12-21-2018, 03:19 PM

Will post pics as soon as I get a chance to take some, will be this evening.

**leddzepp** · 12-21-2018, 04:46 PM

I bought a pair at autozone last year, I’ll look for a part number. Solid steel is all I will use from now on. They work very well.

12-19-2018, 07:03 PM	#1
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Looking for solid steel 2.5" exhaust donut gaskets I would like to find a pair of new 2.5" exhaust donut flange gaskets. Must be solid metal No fiber crap ones. Let me know if you have some or if anyone knows where I can find a pair please. Thanks in advance. Rod.

12-19-2018, 11:03 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Looking for solid steel 2.5" exhaust donut gaskets Rod, I may have a pair, I will look tomorrow. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-19-2018, 11:32 PM	#4
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: Looking for solid steel 2.5" exhaust donut gaskets I purchased 2 from rock auto. Thanks for that!

12-19-2018, 11:47 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Looking for solid steel 2.5" exhaust donut gaskets Ok glad you found them __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-20-2018, 01:31 AM	#6
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 923	Re: Looking for solid steel 2.5" exhaust donut gaskets Corvette Central sells them. https://www.corvettecentral.com/c3-6...21%26count%3d9

12-20-2018, 12:04 PM	#7
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: Looking for solid steel 2.5" exhaust donut gaskets I actually bought those and they are not hard like my Nos 2" Ramhorn ones. They look layered like the fiber ones. Not what I was hoping for. If I press hard with my fingernail it makes a mark. If it was solid steel i should not be able to do that. 70STOVEBOLT please post pictures of yours. I may take them as well. Attached Images Last edited by chewychevy67; 12-20-2018 at 12:12 PM.

12-20-2018, 11:33 PM	#10
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: Looking for solid steel 2.5" exhaust donut gaskets I did purchase a few from rock auto at that exact part number. When I get them I will post pictures. The corvette central one said metal as well so now I'm not sure. That's why if 70 stove bolt has the real metal ones I want to make sure I get a set. Hate the cheap fiber ones.

12-20-2018, 11:36 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Looking for solid steel 2.5" exhaust donut gaskets The ones I have are Mahle, I can post pics tomorrow. I only have one set I think. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-20-2018, 11:56 PM	#12
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,438	Re: Looking for solid steel 2.5" exhaust donut gaskets I'll let pdxk5 have the ones 70STOVEBOLT has if he wants as he needs them as well. I will see what I get from rock auto 1st.

12-21-2018, 09:24 AM	#14
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Looking for solid steel 2.5" exhaust donut gaskets The ones I have are the F7139S which have been discontinued by Mahle, they only offer the fiber type now. I thought I had an unused set but they are slightly used, I ran them with the manifolds for about 500 miles then switched to headers. If anyone is interested let me know and I will get pics. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-21-2018, 03:03 PM	#15
PDXk5 Senior Member Join Date: Aug 2012 Location: Portland, OR Posts: 923	Re: Looking for solid steel 2.5" exhaust donut gaskets I'm interested. Please post pics.

12-21-2018, 03:19 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: Looking for solid steel 2.5" exhaust donut gaskets Will post pics as soon as I get a chance to take some, will be this evening. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

12-21-2018, 04:46 PM	#17
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,995	Re: Looking for solid steel 2.5" exhaust donut gaskets I bought a pair at autozone last year, I’ll look for a part number. Solid steel is all I will use from now on. They work very well. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.