|
12-19-2018, 10:00 PM
|
#1 |
|
Registered User
Join Date: Dec 2018
Location: CHINA GROVE NC
Posts: 2
|
Column question
So I have watched this site for years and always get great information from all of you. So I have a 70 c10 it has a straight 6, 3 on the tree. I am putting a 283 with 700r4 in and have a chance to get a 93 s10 tilt steering column, has anyone used one or know if it will work? Thanks for all the help!
Last edited by chrisp109r; 12-19-2018 at 10:21 PM. |
|
|
|
12-23-2018, 08:36 AM
|
#2 |
|
Registered User
Join Date: Apr 2007
Location: Norman, OK
Posts: 222
|
Re: Column question
I'm no expert on 93 S-10s, but I would assume that the column would not fit without some drastic modifications.
Our trucks were the last of those with the column held to the underside of the dash with a simple strap of steel. Newer trucks have a more substantial bracket and would not bolt up in your truck. Beyond that, the wiring harnesses are different and I would think the length of the column would be, too. I would steer clear (sorry for the pun).
__________________
67 C-10 LWB "Cow-butt-spotted" (neighbor's term) - work in progress. 350/TH400/3.73 67 Chevelle SS Clone  454/TH400/3.73
|
|
|
|
|
12-23-2018, 09:54 AM
|
#3 |
|
Registered User
Join Date: Dec 2018
Location: CHINA GROVE NC
Posts: 2
|
Re: Column question
Thanks for the reply, I will find something different.
|
|
|
|
|
12-23-2018, 10:00 AM
|
#4 |
|
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,462
|
Re: Column question
Newer columns have side rods, high beam switch etc..they interfere with mounting also.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=635605 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
