AZ WTB: 67 - 72 cab pieces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69Tom · 12-26-2018, 05:07 PM

OK, so I thought I'd just throw this out there. I have sections of my cab that are not reproduced, but need replacement. Rather than try to shape metal to fit, I think it'd be easier for me to find someone that has a cab that is not worth selling as a whole.

I need basically sections from where the rear window starts at the bottom, about 4 inches down, and then extending all the way around to the door opening.

See below pic. Need for both sides (just driver's side shown.)

I appreciate the help on this.

69Tom · 12-26-2018, 05:10 PM

Passenger area needed:

*randy500* · 12-26-2018, 06:15 PM

I have these, drip cut off.

69Tom · 12-26-2018, 06:42 PM

Quote:

Originally Posted by randy500

I have these, drip cut off.

I should have just asked you to begin with, although I'm not sure shipping them with the other parts would have been a good idea anyhow.

How much?

*randy500* · 12-26-2018, 06:47 PM

Quote:

Originally Posted by 69Tom

I should have just asked you to begin with, although I'm not sure shipping them with the other parts would have been a good idea anyhow.

How much?

Wouldn’t have saved any shipping, the ps parts went in a med flat rate box, I dropped it off a couple hours ago.

$100 shipped for those 2 cuts, hoping they both fit in a large flat rate box.i will need dimensions up and down from the body line for the cut.

**BobW** · 12-26-2018, 06:50 PM

I have some clean parts. Too dark to take a picture this after noon.
I can send them to you tomorrow.

*randy500* · 12-26-2018, 06:50 PM

I guess up from the window corner dimension.
Left of the window corner dimension
And below the body line dimension.

I will cut the window out and check the pinch weld for rust if the price works for you.

69Tom · 12-26-2018, 06:56 PM

I will try and get dimensions tonight.

69Tom · 12-26-2018, 07:16 PM

Quote:

Originally Posted by BobW

I have some clean parts. Too dark to take a picture this after noon.
I can send them to you tomorrow.

Sounds good. How much do you want for them?

Thanks.

morepwr · 12-26-2018, 11:53 PM

I might have the pieces as well. They might not have enough material though. I cut the roof off straight and level with the pinch weld area for the back window and it looks like you have weld in that area around to the door opening? I don't have pics right now but if the other offers don't work out, I can get you pics and/or dimensions of what I have.

69Tom · 12-27-2018, 11:44 AM

Sorry guys, I dropped the ball last night in getting measurements. I'll be back at my truck tomorrow evening where I'll get measurements before the weekend.

**BobW** · 12-27-2018, 01:55 PM

$80.00 shipped for the two cut outs

69Tom · 12-27-2018, 01:59 PM

Quote:

Originally Posted by BobW

$80.00 shipped for the two cut outs

PM sent Bob.

69Tom · 12-27-2018, 06:57 PM

For Bob.

12-26-2018, 05:07 PM	#1
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	WTB: 67 - 72 cab pieces OK, so I thought I'd just throw this out there. I have sections of my cab that are not reproduced, but need replacement. Rather than try to shape metal to fit, I think it'd be easier for me to find someone that has a cab that is not worth selling as a whole. I need basically sections from where the rear window starts at the bottom, about 4 inches down, and then extending all the way around to the door opening. See below pic. Need for both sides (just driver's side shown.) I appreciate the help on this. Attached Images

12-26-2018, 05:10 PM	#2
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: WTB: 67 - 72 cab pieces Passenger area needed: Attached Images

12-26-2018, 06:15 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB: 67 - 72 cab piece. s I have these, drip cut off. Attached Images

12-26-2018, 06:50 PM	#6
BobW Junior Member Join Date: Sep 2015 Location: Prairie View, ll Posts: 61	Re: WTB: 67 - 72 cab pieces I have some clean parts. Too dark to take a picture this after noon. I can send them to you tomorrow.

12-26-2018, 06:50 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB: 67 - 72 cab pieces I guess up from the window corner dimension. Left of the window corner dimension And below the body line dimension. I will cut the window out and check the pinch weld for rust if the price works for you.

12-26-2018, 06:56 PM	#8
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: WTB: 67 - 72 cab pieces I will try and get dimensions tonight.

12-26-2018, 11:53 PM	#10
morepwr Registered User Join Date: Jun 2018 Location: Ventura, Ca Posts: 206	Re: WTB: 67 - 72 cab pieces I might have the pieces as well. They might not have enough material though. I cut the roof off straight and level with the pinch weld area for the back window and it looks like you have weld in that area around to the door opening? I don't have pics right now but if the other offers don't work out, I can get you pics and/or dimensions of what I have. __________________

12-27-2018, 11:44 AM	#11
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: WTB: 67 - 72 cab pieces Sorry guys, I dropped the ball last night in getting measurements. I'll be back at my truck tomorrow evening where I'll get measurements before the weekend.

12-27-2018, 01:55 PM	#12
BobW Junior Member Join Date: Sep 2015 Location: Prairie View, ll Posts: 61	Re: WTB: 67 - 72 cab pieces $80.00 shipped for the two cut outs

12-27-2018, 06:57 PM	#14
69Tom Registered User Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,335	Re: WTB: 67 - 72 cab pieces For Bob. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.