Speakers that will fit under bench seat???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

57rookie · 12-26-2018, 04:55 PM

Has anyone put 6x9 speakers with the standard box enclosures under the stock bench of a 67-72 pu?? Wanting to know if it fits.
Just got a Custom AutoSound slide bar reproduction radio to install for Xmas and was wanting 6x9’s under the seat but wanted to see if they would fit - looks like they would....
Also open to other suggestions. Need to fit them under seat since my original gas tank is still behind the seat.
Thanks

Cyberlaw · 12-26-2018, 07:53 PM

I’m interested in this, too! I want to retain the stock interior and not use kickpanel speakers.

Redneck Rydes · 12-26-2018, 08:21 PM

I used 4x10 speakers and made boxes to fit on there back, they can slide in under the seat when you don't want a lot of tune and can slide out when to rock out

54Caddy · 12-26-2018, 09:47 PM

Should fit no problem. Know of a few trucks with 2 10” subwoofers under factory seat

Eric Johnson · 12-27-2018, 08:59 AM

Would like to find some large Bluetooth speakers that could fit under the seat so I could stream from my phone. That way I could leave my stock AM that works in there as well...

dmw319 · 12-27-2018, 10:09 AM

I have 2 Blaupunkt boat speakers under my seat. not sure the size but they sound great.

**tim71** · 12-28-2018, 06:57 PM

I put four 6" round speakers under my seat. I built the speaker boxes out of pine and they sit facing upward under the seat. The depth of the boxes are(from top to bottom) approx. 1.5" to 2.0". I was concerned that the speakers would sound poorly since they are facing up, but I was pleasantly surprised how good they sound. I went with a lower end Retro radio and it performs nicely also. I think I spent about $250 on the entire effort. Overall, I'm really satisfied with the appearance of the radio and the sound of the radio/speakers. I would rather have a stock AM/FM radio for a more original appearance, but I couldn't find one that looked very good. After installing the retro, I'm not how they jammed a stock radio in AC trucks, not much real estate under there.

kxmotox247 · 12-29-2018, 01:16 AM

I used these and they sounded pretty decent. No holes in the kickpanels or doors. They fit under a stock seat.

https://www.amazon.com/Pioneer-TS-X2...ioneer+TS-X200

12-26-2018, 04:55 PM	#1
57rookie Registered User Join Date: Jul 2011 Location: Calgary, Alberta Posts: 153	Speakers that will fit under bench seat???? Has anyone put 6x9 speakers with the standard box enclosures under the stock bench of a 67-72 pu?? Wanting to know if it fits. Just got a Custom AutoSound slide bar reproduction radio to install for Xmas and was wanting 6x9’s under the seat but wanted to see if they would fit - looks like they would.... Also open to other suggestions. Need to fit them under seat since my original gas tank is still behind the seat. Thanks

12-26-2018, 07:53 PM	#2
Cyberlaw Registered User Join Date: Dec 2014 Location: Haw River, NC Posts: 19	Re: Speakers that will fit under bench seat???? I’m interested in this, too! I want to retain the stock interior and not use kickpanel speakers. __________________ 1972 C10 Custom/Deluxe --"(Formerly)-Hidden Highlander"

12-26-2018, 08:21 PM	#3
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: Speakers that will fit under bench seat???? I used 4x10 speakers and made boxes to fit on there back, they can slide in under the seat when you don't want a lot of tune and can slide out when to rock out

12-26-2018, 09:47 PM	#4
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Speakers that will fit under bench seat???? Should fit no problem. Know of a few trucks with 2 10” subwoofers under factory seat __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-27-2018, 08:59 AM	#5
Eric Johnson Registered User Join Date: Dec 2018 Location: Millbrook, New York Posts: 88	Re: Speakers that will fit under bench seat???? Would like to find some large Bluetooth speakers that could fit under the seat so I could stream from my phone. That way I could leave my stock AM that works in there as well... __________________ 1967 GMC 3/4 ton custom. 283 4 speed unrestored

12-27-2018, 10:09 AM	#6
dmw319 Registered User Join Date: May 2012 Location: Raleigh, NC Posts: 639	Re: Speakers that will fit under bench seat???? I have 2 Blaupunkt boat speakers under my seat. not sure the size but they sound great. __________________ 1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167

12-28-2018, 06:57 PM	#7
tim71 Senior Member Join Date: Oct 2015 Location: Brownsburg, IN Posts: 1,089	Re: Speakers that will fit under bench seat???? I put four 6" round speakers under my seat. I built the speaker boxes out of pine and they sit facing upward under the seat. The depth of the boxes are(from top to bottom) approx. 1.5" to 2.0". I was concerned that the speakers would sound poorly since they are facing up, but I was pleasantly surprised how good they sound. I went with a lower end Retro radio and it performs nicely also. I think I spent about $250 on the entire effort. Overall, I'm really satisfied with the appearance of the radio and the sound of the radio/speakers. I would rather have a stock AM/FM radio for a more original appearance, but I couldn't find one that looked very good. After installing the retro, I'm not how they jammed a stock radio in AC trucks, not much real estate under there. Attached Images __________________ 1972 Blazer Highlander 1971 GMC K1500 SWB (sold) 2004 Corvette Z06 CE

12-29-2018, 01:16 AM	#8
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,396	Re: Speakers that will fit under bench seat???? I used these and they sounded pretty decent. No holes in the kickpanels or doors. They fit under a stock seat. https://www.amazon.com/Pioneer-TS-X2...ioneer+TS-X200 __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.