HELP, need a nut! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Trucks · 05-23-2004, 12:33 PM

The nut that hold the yoke onto the rearend stripped out taking it off, I can probably file the threads on the post btu need a nut, how many where there? fine thread? I can't tell by looking its really stripped, it seems to be 3/4 inch diameter on the threads.
OR can I use a regular nut with some form of loctite? The nut I took off had no pin, but had small tabs pressed down to keep it in place. No parts store had the nut. THANKS hope do fix this soon!

05-23-2004, 12:33 PM	#1
Trucks Is that a Chevy 69...? Join Date: Feb 2004 Location: Brownton MN Posts: 112	HELP, need a nut! The nut that hold the yoke onto the rearend stripped out taking it off, I can probably file the threads on the post btu need a nut, how many where there? fine thread? I can't tell by looking its really stripped, it seems to be 3/4 inch diameter on the threads. OR can I use a regular nut with some form of loctite? The nut I took off had no pin, but had small tabs pressed down to keep it in place. No parts store had the nut. THANKS hope do fix this soon! __________________ Ahhhh, the wonderful sound of a rumbling V8.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.