TN WTB - shifter boot trim ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CC69Rat** · 02-16-2018, 07:46 PM

I am looking to buy a shifter boot trim ring. I could do an oval shape, or rectangle but the issue I'm running into is most of the aftermarket ones are too small.

I need the inside dimensions to be around 5.5" wide and 6.5" top to bottom on the inside of the ring. I'm thinking maybe a c20 /30 May have had a larger ring on it? I'd love to find someone who could cut one out of billet for me.

Let me know, I'm open for ideas. Lokar / Billet Specialties were too small for my shifter base.
Thanks

jaybatta · 02-16-2018, 10:47 PM

Think I have what you need, let me go look

jaybatta · 02-16-2018, 11:20 PM

Here's what I have. Your choice $25 shipped from MT

**CC69Rat** · 02-16-2018, 11:24 PM

The one on the far right. .. what's the inside measurements side-to-side and top to bottom inside the hole?

I'm probably in for that one I just need to make sure its going to fit. Any bad rust or pitting? Thanks for your help

jaybatta · 02-17-2018, 11:16 AM

Here ya go

No pitting, some surface rust

**CC69Rat** · 02-17-2018, 11:31 AM

Yep .. that will work. Thank you sir.

PM how you want me to get you some money. I'll take that one. My zip is 37343.

**CC69Rat** · 02-17-2018, 04:15 PM

Hey Joe, I'm away from my computer at the moment but I'll get that money over to you asap. I have received your PM, I'm just not wild about signing into my PayPal account over my cell phone.

jaybatta · 02-17-2018, 04:17 PM

No worries, it's not going anywhere. If I get some time, I'll try to sandblast it for ya if you'd like.

**CC69Rat** · 02-17-2018, 04:23 PM

Really man? I'd certainly appreciate that I don't have a blaster.. I'll pay you to do it if you like.

I'm going to use it in my 68, I may even have it chromed not sure yet.

Either way, thanks again for all yuour help.

jaybatta · 02-17-2018, 04:29 PM

Nah, no big deal. I'll try to get it done this weekend, if not it'll be Monday before it's ready to ship.

jaybatta · 02-19-2018, 08:04 PM

Ok, got er all cleaned up. There was a slight Bend and one side I tried to straighten it out the best I could. She'll go in the mail as soon as I receive payment

Thanks

Joe

**A1971Blazer** · 02-19-2018, 09:43 PM

I machined a few 4x4 transfer case boot rings from ¼" aluminum and had them anodized....sold about 35 of them....
someone had asked about shifter boot rings...
if there was enough interest, I would be willing to set up and run some of those as well....
I would need to get the dimensions and hole spacings for the stock ones to duplicate the hole pattern....
I usually run these when business is a little slow

This is the TC boot ring...has NP205 shift pattern engraved on it
Name: IMG_1467b.jpg
Views: 229
Size: 68.0 KB

Name: IMG_1467b.jpg
Views: 229
Size: 68.0 KB

installed on black carpet
Name: IMG_1457.jpg
Views: 225
Size: 87.7 KB

raw plate stock and finished machining process
Name: IMG_1479.jpg
Views: 229
Size: 44.7 KB

Anodized and ready to engrave
Name: IMG_1494.jpg
Views: 226
Size: 51.7 KB

jaybatta · 02-19-2018, 09:49 PM

Those look pretty good, how much are you charging?

**A1971Blazer** · 02-19-2018, 09:51 PM

Quote:

Originally Posted by jaybatta

Those look pretty good, how much are you charging?

$50.00 shipped to you....includes the ring, 4 black screws and 4 push-on sheet metal nuts....
I'm out right now but I will be running another batch soon...

I sold these like hot cakes on several Facebook groups...

jaybatta · 02-19-2018, 09:57 PM

Ok well, put me down for 2 when you get fired up again.

Thanks

Joe

**A1971Blazer** · 02-19-2018, 10:07 PM

Quote:

Originally Posted by jaybatta

Ok well, put me down for 2 when you get fired up again.

Thanks

Joe

will do......thanks !

**CC69Rat** · 02-19-2018, 10:38 PM

Joe ' I haven't forgotten you brother, I'm just covered up at work. I build houses and this time of year is nuts.

jaybatta · 02-19-2018, 11:43 PM

Quote:

Originally Posted by CC69Rat

Joe ' I haven't forgotten you brother, I'm just covered up at work. I build houses and this time of year is nuts.

No worries man, just let me know when you're ready

Joe

**CC69Rat** · 02-20-2018, 10:55 PM

Paypal sent - Thank you for sand blasting it for me.

And also a BIG Thank You for your service to our country.

jaybatta · 02-20-2018, 11:14 PM

No worries man, and thank you. I'll get it shipped out tomorrow.
Just PM me your address.

Thanks!

Joe

Husker · 01-08-2019, 12:01 AM

A1971Blazer I want one also when you get more.
Thanks
Ron

**BlazerBill** · 01-08-2019, 12:33 AM

I might be interested when you have more.
Thanks
Bill

**Blazerowner** · 01-08-2019, 02:33 AM

He has an ad up selling them.

Husker · 01-08-2019, 11:29 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=775036

02-16-2018, 07:46 PM	#1
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	WTB - shifter boot trim ring I am looking to buy a shifter boot trim ring. I could do an oval shape, or rectangle but the issue I'm running into is most of the aftermarket ones are too small. I need the inside dimensions to be around 5.5" wide and 6.5" top to bottom on the inside of the ring. I'm thinking maybe a c20 /30 May have had a larger ring on it? I'd love to find someone who could cut one out of billet for me. Let me know, I'm open for ideas. Lokar / Billet Specialties were too small for my shifter base. Thanks __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-16-2018, 10:47 PM	#2
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Think I have what you need, let me go look __________________ Joe 1968 K20 1970 K20 Semper Fi

02-16-2018, 11:20 PM	#3
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Here's what I have. Your choice $25 shipped from MT Attached Images __________________ Joe 1968 K20 1970 K20 Semper Fi

02-16-2018, 11:24 PM	#4
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring The one on the far right. .. what's the inside measurements side-to-side and top to bottom inside the hole? I'm probably in for that one I just need to make sure its going to fit. Any bad rust or pitting? Thanks for your help __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-17-2018, 11:16 AM	#5
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Here ya go No pitting, some surface rust Attached Images __________________ Joe 1968 K20 1970 K20 Semper Fi

02-17-2018, 11:31 AM	#6
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring Yep .. that will work. Thank you sir. PM how you want me to get you some money. I'll take that one. My zip is 37343. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-17-2018, 04:15 PM	#7
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring Hey Joe, I'm away from my computer at the moment but I'll get that money over to you asap. I have received your PM, I'm just not wild about signing into my PayPal account over my cell phone. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) Last edited by CC69Rat; 02-17-2018 at 04:15 PM. Reason: Misspelling

02-17-2018, 04:17 PM	#8
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring No worries, it's not going anywhere. If I get some time, I'll try to sandblast it for ya if you'd like. __________________ Joe 1968 K20 1970 K20 Semper Fi

02-17-2018, 04:23 PM	#9
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring Really man? I'd certainly appreciate that I don't have a blaster.. I'll pay you to do it if you like. I'm going to use it in my 68, I may even have it chromed not sure yet. Either way, thanks again for all yuour help. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-17-2018, 04:29 PM	#10
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Nah, no big deal. I'll try to get it done this weekend, if not it'll be Monday before it's ready to ship. __________________ Joe 1968 K20 1970 K20 Semper Fi

02-19-2018, 08:04 PM	#11
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Ok, got er all cleaned up. There was a slight Bend and one side I tried to straighten it out the best I could. She'll go in the mail as soon as I receive payment Thanks Joe Attached Images __________________ Joe 1968 K20 1970 K20 Semper Fi

02-19-2018, 09:43 PM	#12
A1971Blazer Senior Member Join Date: Nov 2013 Location: East Tennessee Posts: 2,128	Re: WTB - shifter boot trim ring I machined a few 4x4 transfer case boot rings from ¼" aluminum and had them anodized....sold about 35 of them.... someone had asked about shifter boot rings... if there was enough interest, I would be willing to set up and run some of those as well.... I would need to get the dimensions and hole spacings for the stock ones to duplicate the hole pattern.... I usually run these when business is a little slow This is the TC boot ring...has NP205 shift pattern engraved on it installed on black carpet raw plate stock and finished machining process Anodized and ready to engrave __________________ 1967 C10 Step side 1968 C10 Step side 1970 Chevrolet K/5 Blazer 1972 Chevrolet K/5 Blazer .............

02-19-2018, 09:49 PM	#13
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Those look pretty good, how much are you charging? __________________ Joe 1968 K20 1970 K20 Semper Fi

02-19-2018, 09:57 PM	#15
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring Ok well, put me down for 2 when you get fired up again. Thanks Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

02-19-2018, 10:38 PM	#17
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring Joe ' I haven't forgotten you brother, I'm just covered up at work. I build houses and this time of year is nuts. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

02-20-2018, 10:55 PM	#19
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: WTB - shifter boot trim ring Paypal sent - Thank you for sand blasting it for me. And also a BIG Thank You for your service to our country. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-20-2018, 11:14 PM	#20
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: WTB - shifter boot trim ring No worries man, and thank you. I'll get it shipped out tomorrow. Just PM me your address. Thanks! Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

01-08-2019, 12:01 AM	#21
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: WTB - shifter boot trim ring A1971Blazer I want one also when you get more. Thanks Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

01-08-2019, 12:33 AM	#22
BlazerBill Senior Member Join Date: Apr 2013 Location: Northern ca. Wine country Posts: 405	Re: WTB - shifter boot trim ring I might be interested when you have more. Thanks Bill

01-08-2019, 02:33 AM	#23
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,940	Re: WTB - shifter boot trim ring He has an ad up selling them. __________________ Kirk 72 Blazer CST 4wd highlander 66 Nova

01-08-2019, 11:29 PM	#24
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: WTB - shifter boot trim ring http://67-72chevytrucks.com/vboard/s...d.php?t=775036 __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

Register or Log In To remove these advertisements.