Are Trim holes from 67 to 72 the same - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J3rm0ff · 01-12-2019, 06:16 PM

I have a 72 Cheyenne that I put a 68 front clip on. I want to put the trim that goes over the wheels openings and across the lower part of the door and bed. Will these use the same holes as the lower Cheyenne trim or do I need to weld them shut. Thanks.

**too much stuff** · 01-12-2019, 07:18 PM

Pretty sure they are different.

**jocko** · 01-12-2019, 07:35 PM

agreed. if you used the cheyenne trim holes for 68 trim, the few that would be present anyway, would be too low. For instance, on the door, the cheyenne only has screw on trim retainers at front and back of the door (rest are stick on in between) - and the screws are in the middle of the trim band width for mounting.

J3rm0ff · 01-12-2019, 08:06 PM

Thanks looks like that answers my question. Thanks guys.

01-12-2019, 06:16 PM	#1
J3rm0ff Registered User Join Date: Nov 2017 Location: Canton ohio Posts: 269	Are Trim holes from 67 to 72 the same I have a 72 Cheyenne that I put a 68 front clip on. I want to put the trim that goes over the wheels openings and across the lower part of the door and bed. Will these use the same holes as the lower Cheyenne trim or do I need to weld them shut. Thanks. Attached Images

01-12-2019, 07:18 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Are Trim holes from 67 to 72 the same Pretty sure they are different. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-12-2019, 07:35 PM	#3
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Are Trim holes from 67 to 72 the same agreed. if you used the cheyenne trim holes for 68 trim, the few that would be present anyway, would be too low. For instance, on the door, the cheyenne only has screw on trim retainers at front and back of the door (rest are stick on in between) - and the screws are in the middle of the trim band width for mounting. Attached Images

01-12-2019, 08:06 PM	#4
J3rm0ff Registered User Join Date: Nov 2017 Location: Canton ohio Posts: 269	Re: Are Trim holes from 67 to 72 the same Thanks looks like that answers my question. Thanks guys.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.