|
07-07-2015, 11:39 PM
|
#1 |
|
Registered User
Join Date: Jul 2015
Location: earth
Posts: 99
|
3 speed conversion
I need help with a 3 speed conversion. I have a 77 C10 with a Saginaw 3 speed on the column. I was curious if there is a DIY way to switch it to floor shift, or if someone could set me in the direction of a good kit?
thanks |
|
|
|
07-08-2015, 12:02 AM
|
#2 |
|
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,553
|
Re: 3 speed conversion
THe best thing you can do is get a hurst mastershift. The shifter is available new. With the required installation kit, it gets expensive. I got mine from ebay.
http://www.hurst-shifters.com/produc...422&sm=125&e=0 http://www.hurst-shifters.com/produc...422&sm=125&e=0 Next best is the hurst indy shifter. Significantly lower quality and worse shift feel but functional. Recently out of production, you should be able to find one still new in the box: http://www.hurst-shifters.com/produc...pick-up-truck/ Least recommended (at least by me) is the Mr Gasket shifter. Good price, bad shifter. Sloppy to say the least. Gates allow moving the shifter without moving the shift linkage. Out of production but many auto parts stores still have them on the shelf: Mr Gasket 7667A
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed |
|
|
|
|
07-08-2015, 12:12 AM
|
#3 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
|
Re: 3 speed conversion
x2 on the hurst mastershift.
The Indy and Mr.Gasket are not good in stock form but a simple fix with a drill and cotter key cures them. |
|
|
|
|
07-08-2015, 12:18 AM
|
#4 |
|
Registered User
Join Date: Jul 2015
Location: earth
Posts: 99
|
Re: 3 speed conversion
The hurst mastershift looks pretty good, but it is on the pricey side. I"m not decided on what to do yet, but whatever way i do it i will update and see how it goes
|
|
|
|
|
07-08-2015, 10:10 AM
|
#5 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: 3 speed conversion
the only issue with some of the hurst shifters is the arm is kinda short I did not look at the one that was linked above but on one of my trucks that came that way it was like the shifter hugged the bench eat in first and third
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
01-19-2019, 06:19 AM
|
#6 |
|
Registered User
Join Date: Jan 2014
Location: Charleston, SC
Posts: 15
|
Re: 3 speed conversion
X2 on the Hurst Mastershift. About 400 bucks for the shifter and installation kit but no more wonky column shift!
__________________
86 C10 Custon Deluxe - 305, 3 on tree |
|
|
|
 |
| Bookmarks |
| Tags |
| c10, column shifter, floor shift, saginaw |
|
|
Linear Mode
