47-55.1 Aftermarket Brake Booster Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dsraven · 01-20-2019, 01:42 AM

stock engine mounts from the front and then attaches to the bell housing which sits on 2 rubber puck mounts that basically rest on the cross member behind the engine and the trans hangs behind that with a torque tube driveline to the rear axle, correct? not sure what the clutch linkage looks like but by the pedal arrangement it has to pivot on the same shaft as the brake pedal.
again, some pics would help.

01-20-2019, 01:42 AM	#16
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 9,047	Re: Aftermarket Brake Booster Question stock engine mounts from the front and then attaches to the bell housing which sits on 2 rubber puck mounts that basically rest on the cross member behind the engine and the trans hangs behind that with a torque tube driveline to the rear axle, correct? not sure what the clutch linkage looks like but by the pedal arrangement it has to pivot on the same shaft as the brake pedal. again, some pics would help.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.