GA 1970 c10 parting out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

atm70chevy · 12-06-2017, 11:02 PM

Do you have the brackets for the steering column?

Anthony

**heehawracing** · 12-07-2017, 10:00 AM

Quote:

Originally Posted by atm70chevy

Do you have the brackets for the steering column?

Anthony

sorry sold

Acp13 · 12-11-2017, 05:47 PM

Driver side front fender?

Blk02ss · 12-28-2017, 01:56 AM

Following

Drewbee · 12-28-2017, 09:51 AM

Could you show me a picture of both sides of the rear spring mounts on the frame? I may be interested in buying them.

**painterljp** · 12-28-2017, 10:42 AM

Spare tire mount the one in the bed?

wmurdock72 · 12-30-2017, 06:03 AM

I am interested in the heater core brackets if it is non AC...also the screws for the blower motor and the screws/bolts that attach the heater box under dash and on the firewall...Let me know price and availability. Thanks

greywurm · 01-10-2018, 10:23 AM

I need this style carrier bearing mount for a manual drive shaft. Do you still have it?

**heehawracing** · 01-10-2018, 10:30 AM

Quote:

Originally Posted by greywurm

I need this style carrier bearing mount for a manual drive shaft. Do you still have it?

nothing left on this truck gut i will look to see if i have one like that

69BUCKET · 01-15-2018, 11:58 AM

Looking for rear taillight harness, lighter and it's bezel, heater controls...

tallbob · 12-11-2018, 08:48 PM

I am looking for a patch panel for the rear of my bed floor by the tailgate.
Thanks much, Bob

panhead59 · 12-12-2018, 11:11 AM

Sorry i just trashed a whole bed floor when nobody wanted it for free ! Had plenty of good large patches. Bad timing i guess.

tallbob · 01-03-2019, 10:47 PM

Still looking for a bed floor patch panel left rear drivers side at end of floor by tailgate. Thanks

bulldawg2 · 01-20-2019, 04:21 AM

Was it a factory a/c truck? I am looking for a dash

**heehawracing** · 01-20-2019, 10:02 AM

Quote:

Originally Posted by bulldawg2

Was it a factory a/c truck? I am looking for a dash

this truck is gone but i have a dash call me 7704687776

**Tripmiester** · 01-20-2019, 10:07 AM

Any tailgates Sir?

Thank
Trip

**Tripmiester** · 01-20-2019, 10:16 AM

Any tailgates Sir?

Thank
Trip

12-06-2017, 11:02 PM	#51
atm70chevy Registered User Join Date: Feb 2013 Location: Longview, Texas Posts: 173	Re: 1970 c10 parting out Do you have the brackets for the steering column? Anthony

12-11-2017, 05:47 PM	#53
Acp13 Registered User Join Date: Dec 2017 Location: Savannah, Georgia Posts: 6	Re: 1970 c10 parting out Driver side front fender?

12-28-2017, 01:56 AM	#54
Blk02ss Registered User Join Date: Dec 2017 Location: Prattville, Alabama Posts: 4	Re: 1970 c10 parting out Following

12-28-2017, 09:51 AM	#55
Drewbee Registered User Join Date: Dec 2011 Location: Villa Rica, GA Posts: 330	Re: 1970 c10 parting out Could you show me a picture of both sides of the rear spring mounts on the frame? I may be interested in buying them.

12-28-2017, 10:42 AM	#56
painterljp Senior Member Join Date: Nov 2014 Location: Albuquerque NM Posts: 901	Re: 1970 c10 parting out Spare tire mount the one in the bed?

12-30-2017, 06:03 AM	#57
wmurdock72 Registered User Join Date: Jul 2016 Location: Maize, Ks Posts: 17	Re: 1970 c10 parting out I am interested in the heater core brackets if it is non AC...also the screws for the blower motor and the screws/bolts that attach the heater box under dash and on the firewall...Let me know price and availability. Thanks __________________ 1972 k10 396 8" suspension lift 3" body lift - build in progress

01-10-2018, 10:23 AM	#58
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: 1970 c10 parting out I need this style carrier bearing mount for a manual drive shaft. Do you still have it? Attached Images __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

01-15-2018, 11:58 AM	#60
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: 1970 c10 parting out Looking for rear taillight harness, lighter and it's bezel, heater controls...

12-11-2018, 08:48 PM	#61
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 1970 c10 parting out I am looking for a patch panel for the rear of my bed floor by the tailgate. Thanks much, Bob

12-12-2018, 11:11 AM	#62
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 493	Re: 1970 c10 parting out Sorry i just trashed a whole bed floor when nobody wanted it for free ! Had plenty of good large patches. Bad timing i guess. __________________ "You are not forgotten" USMC 75-79 (Aviation Ordnance Tech- F-4 Phantom) 1959 H-D Panhead. Owned since 1978. Currently with son in Lawton, OK. 1968 Chevy Custom SWB pick up. Fleetside. Lowered 4/6. Totally refurbished. 1966 Pontiac GTO. 4 speed. Saved original 389. Now has slightly built 455 engine. 355 rear gears. Very fun to drive !

01-03-2019, 10:47 PM	#63
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: 1970 c10 parting out Still looking for a bed floor patch panel left rear drivers side at end of floor by tailgate. Thanks

01-20-2019, 04:21 AM	#64
bulldawg2 Registered User Join Date: Nov 2012 Location: Powder Springs GA Posts: 15	Re: 1970 c10 parting out Was it a factory a/c truck? I am looking for a dash

01-20-2019, 10:07 AM	#66
Tripmiester Senior Member Join Date: Jul 2018 Location: Bethany Connecticut Posts: 370	Re: 1970 c10 parting out Any tailgates Sir? Thank Trip

01-20-2019, 10:16 AM	#67
Tripmiester Senior Member Join Date: Jul 2018 Location: Bethany Connecticut Posts: 370	Re: 1970 c10 parting out Any tailgates Sir? Thank Trip



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.