My 1970 GMC “Project Splice” - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewychevy67 · 01-28-2019, 06:09 PM

That's a sweet looking colour

**Kronald_70GMC** · 01-30-2019, 08:08 PM

I've been grinding and grinding away on the pan. Too bad I had to add that filler rod on the one side there. Sure makes for alot more grinding.

I'm almost ready to do another surgery here on the inner rocker. Hoping for a solid rust free floor for the middle of February!

The shop floor has also been much less clutery since I installed the hose reel.

TA_C10 · 01-30-2019, 11:15 PM

Looking good man. I'm going through the same ol crap. Fitment on these replacement panels is hit or miss. Right now I'm working on my inner roof header panel and I had to make like 8 relief cuts on that thing to make it follow the roof line properly... Floor panels, kick panels, rockers, everything I have replaced has been off and I had to make fit proper. Good luck man, keep up the good work!

.

**Kronald_70GMC** · 02-01-2019, 11:00 PM

Quote:

Originally Posted by TA_C10

Looking good man. I'm going through the same ol crap. Fitment on these replacement panels is hit or miss. Right now I'm working on my inner roof header panel and I had to make like 8 relief cuts on that thing to make it follow the roof line properly... Floor panels, kick panels, rockers, everything I have replaced has been off and I had to make fit proper. Good luck man, keep up the good work!

.

Thanks for the read! I just finished catching up with your thread and I'm subed. Thanks as well for the compliments.

**Kronald_70GMC** · 02-06-2019, 11:18 PM

Back at it again tonight. Good news is that my floor pan is one piece again, bad news is its time to grind again.

I ended up scoring some t5 fluorescent fixtures off work so I had to go out with the old in with the new. I have to say it's damn bright now.

Hoping to stick more on this floor for a while now and less on garage updates.

After all it is titled "My 1970 GMC Project" not "My Garage, A total transformation"

Here's what I did tonight...

**72 tigger** · 02-07-2019, 05:57 AM

Making progress- lighting looks good too

**Kronald_70GMC** · 02-07-2019, 09:24 AM

Quote:

Originally Posted by 72 tigger

Making progress- lighting looks good too

Thank you

01-28-2019, 06:09 PM	#1
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,427	Re: My 1970 GMC Project That's a sweet looking colour

01-30-2019, 08:08 PM	#2
Kronald_70GMC Senior Member Join Date: Sep 2015 Location: Martensville, Saskatchewan Posts: 956	Re: My 1970 GMC Project I've been grinding and grinding away on the pan. Too bad I had to add that filler rod on the one side there. Sure makes for alot more grinding. I'm almost ready to do another surgery here on the inner rocker. Hoping for a solid rust free floor for the middle of February! The shop floor has also been much less clutery since I installed the hose reel. Attached Images __________________ Kyle 1970 GMC "Project Splice" 2017 Silverado LTZ (Daily Driver) IG: kyle_ronald

01-30-2019, 11:15 PM	#3
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: My 1970 GMC Project Looking good man. I'm going through the same ol crap. Fitment on these replacement panels is hit or miss. Right now I'm working on my inner roof header panel and I had to make like 8 relief cuts on that thing to make it follow the roof line properly... Floor panels, kick panels, rockers, everything I have replaced has been off and I had to make fit proper. Good luck man, keep up the good work! . __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".

02-06-2019, 11:18 PM	#5
Kronald_70GMC Senior Member Join Date: Sep 2015 Location: Martensville, Saskatchewan Posts: 956	Re: My 1970 GMC Project Back at it again tonight. Good news is that my floor pan is one piece again, bad news is its time to grind again. I ended up scoring some t5 fluorescent fixtures off work so I had to go out with the old in with the new. I have to say it's damn bright now. Hoping to stick more on this floor for a while now and less on garage updates. After all it is titled "My 1970 GMC Project" not "My Garage, A total transformation" Here's what I did tonight... Attached Images __________________ Kyle 1970 GMC "Project Splice" 2017 Silverado LTZ (Daily Driver) IG: kyle_ronald

02-07-2019, 05:57 AM	#6
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,217	Re: My 1970 GMC Project Making progress- lighting looks good too



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.