DBW pedal mounting bracket - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 08-13-2018, 08:51 AM

Quote:

Originally Posted by Tork?

Great! Payment sent. Take your time shipping, no rush on my end.

Will

Your pedal bracket shipped Saturday vis USPS. Thanks again!

Tork? · 08-15-2018, 10:34 AM

Received earlier this week super fast shipping thanks!

rripp · 08-17-2018, 06:01 PM

Is the three hole pattern where it mounts to the cab for the early or late? I have the corvette pedal and the later cab with the smaller three bold pattern.

**Hart_Rod** · 08-17-2018, 06:28 PM

Quote:

Originally Posted by rripp

Is the three hole pattern where it mounts to the cab for the early or late? I have the corvette pedal and the later cab with the smaller three bold pattern.

Its drilled for both.

dec010974 · 09-30-2018, 05:36 PM

hello hart_rod. have you made any progress for the squarybody crowd? this is what I have.

Coursey · 11-01-2018, 10:21 AM

Anything for 76 Blazer?

CJM72 · 12-29-2018, 07:04 PM

Quote:

Originally Posted by derotoreut

Rob,
I received the Gen IV throttle bracket. It's a nice idea, but I was disappointed that the holes didn't line up. Hopefully this is a once only situation.

Here is my 71 throttle pedal compared to the Gen IV pedal.
Attachment 1370458

You can see when the original pedal bracket is placed on top of the new one, it doesn't line up. Bottom hole in line… Top ones don't match
Attachment 1370459

The holes would have to be re-drilled or re-worked some how. Top left hole in line… Others don't line up.
Attachment 1370460

Top right hole in line… Others don't line up.
Attachment 1370461

I had the same issue. Triangle pattern on my 72 Blazer was not equilateral and the Escalade pedal doesn't match the truck shape either.

**Hart_Rod** · 12-30-2018, 10:14 AM

Quote:

Originally Posted by dec010974

hello hart_rod. have you made any progress for the squarybody crowd? this is what I have.

Quote:

Originally Posted by Coursey

Anything for 76 Blazer?

Several people have used the bracket for there square body, it just depends on which pedal you are using.

Quote:

Originally Posted by CJM72

I had the same issue. Triangle pattern on my 72 Blazer was not equilateral and the Escalade pedal doesn't match the truck shape either.

All brackets are drilled for both bolt patterns (67-70/71-72) now, so there should be an issue with it bolting up. Thanks for posting.

**Utahboy** · 01-31-2019, 10:41 AM

Just sent you a Payment for one Bracket.
Thanks - Tate

**Hart_Rod** · 01-31-2019, 08:57 PM

Quote:

Originally Posted by Utahboy

Just sent you a Payment for one Bracket.
Thanks - Tate

Will ship tomorrow. Thanks!

**halfstep** · 05-17-2019, 04:49 PM

My '72 gas pedal has the NON equilateral triangle bolt pattern (approx 1 9/16" top spread and 2 1/4" to the base hole).
If I read correctly... your brackets now have this floor mount bolt pattern as well as the original pattern for all the different pedal applications. True?
Thanks

**Hart_Rod** · 05-17-2019, 08:02 PM

Quote:

Originally Posted by halfstep

My '72 gas pedal has the NON equilateral triangle bolt pattern (approx 1 9/16" top spread and 2 1/4" to the base hole).
If I read correctly... your brackets now have this floor mount bolt pattern as well as the original pattern for all the different pedal applications. True?
Thanks

Yes sir!

Sayyjimm · 05-20-2019, 12:13 PM

I would like to buy a bracket from you do you have one in stock? If so whats your PayPal so I can send you the money. Thank you

**Hart_Rod** · 05-20-2019, 12:22 PM

Quote:

Originally Posted by Sayyjimm

I would like to buy a bracket from you do you have one in stock? If so whats your PayPal so I can send you the money. Thank you

Robhartley@aol.com. thanks!

Sayyjimm · 05-20-2019, 12:47 PM

Money Sent Thank you

**Hart_Rod** · 05-20-2019, 12:50 PM

Quote:

Originally Posted by Sayyjimm

Money Sent Thank you

Got it! Just to be clear, you need the corvette pedal bracket correct?

Sayyjimm · 05-20-2019, 12:57 PM

Yes that is correct.

RR440MAN · 06-29-2019, 01:01 AM

Sent you he money via PayPal . Thanks for the work in providing this product.

**Hart_Rod** · 06-29-2019, 01:39 PM

Quote:

Originally Posted by RR440MAN

Sent you he money via PayPal . Thanks for the work in providing this product.

Bracket shipped. Thanks!

The Pitt · 11-06-2019, 08:42 PM

Hey Rob, sent you paypal for a Corvette Pedal Bracket. Much appreciated!

**Hart_Rod** · 11-07-2019, 09:12 PM

Quote:

Originally Posted by The Pitt

Hey Rob, sent you paypal for a Corvette Pedal Bracket. Much appreciated!

It shipped today. Thanks!

**halfstep** · 12-06-2019, 01:45 PM

Rob -

I just sent you PayPal $ for the Corvette bracket - thanks for making it.
Paypal referenced protection if not family/gift - saw after the fact there is a fee for sender - did not say what it was. If an issue I will pay it.

Thanks.

**Hart_Rod** · 12-06-2019, 01:54 PM

Quote:

Originally Posted by halfstep

Rob -

I just sent you PayPal $ for the Corvette bracket - thanks for making it.
Paypal referenced protection if not family/gift - saw after the fact there is a fee for sender - did not say what it was. If an issue I will pay it.

Thanks.

No worries. Thanks! Will ship tomorrow.

**Richard** · 01-28-2020, 02:06 PM

Are these available? 72 k10 with a Corvette pedal. I saw a company selling a more elaborate bracket for the 67-72 trucks. I was told discontinued for the 71-72 trucks because the pedal does not sit right. Now only sold for 67-70

**Richard** · 02-03-2020, 01:08 AM

Did you get payment and shipping info?

08-15-2018, 10:34 AM	#152
Tork? Registered User Join Date: May 2013 Location: Chicago, IL Posts: 218	Re: DBW pedal mounting bracket Received earlier this week super fast shipping thanks!

08-17-2018, 06:01 PM	#153
rripp Registered User Join Date: May 2012 Location: Farmington MO Posts: 75	Re: DBW pedal mounting bracket Is the three hole pattern where it mounts to the cab for the early or late? I have the corvette pedal and the later cab with the smaller three bold pattern.

09-30-2018, 05:36 PM	#155
dec010974 Registered User Join Date: Oct 2012 Location: Miami, Florida Posts: 1,004	Re: DBW pedal mounting bracket hello hart_rod. have you made any progress for the squarybody crowd? this is what I have. Attached Images

11-01-2018, 10:21 AM	#156
Coursey Registered User Join Date: Aug 2013 Location: Kentucky Posts: 550	Re: DBW pedal mounting bracket Anything for 76 Blazer? __________________ 1961 Biscayne http://67-72chevytrucks.com/vboard/s...90#post6978790 SOLD 1971 C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=656258SOLD 1966 Suburban http://67-72chevytrucks.com/vboard/s...85#post7323885

01-31-2019, 10:41 AM	#159
Utahboy Senior Member Join Date: May 2014 Location: Linden, Michigan Posts: 520	Re: DBW pedal mounting bracket Just sent you a Payment for one Bracket. Thanks - Tate

05-17-2019, 04:49 PM	#161
halfstep Senior Member Join Date: Feb 2015 Location: Maryland Posts: 248	Re: DBW pedal mounting bracket My '72 gas pedal has the NON equilateral triangle bolt pattern (approx 1 9/16" top spread and 2 1/4" to the base hole). If I read correctly... your brackets now have this floor mount bolt pattern as well as the original pattern for all the different pedal applications. True? Thanks

05-20-2019, 12:13 PM	#163
Sayyjimm Registered User Join Date: May 2008 Location: Grand Rapids MI Posts: 5	Re: DBW pedal mounting bracket I would like to buy a bracket from you do you have one in stock? If so whats your PayPal so I can send you the money. Thank you

05-20-2019, 12:47 PM	#165
Sayyjimm Registered User Join Date: May 2008 Location: Grand Rapids MI Posts: 5	Re: DBW pedal mounting bracket Money Sent Thank you

05-20-2019, 12:57 PM	#167
Sayyjimm Registered User Join Date: May 2008 Location: Grand Rapids MI Posts: 5	Re: DBW pedal mounting bracket Yes that is correct.

06-29-2019, 01:01 AM	#168
RR440MAN Registered User Join Date: Oct 2017 Location: Bakersfield California Posts: 17	Re: DBW pedal mounting bracket Sent you he money via PayPal . Thanks for the work in providing this product.

11-06-2019, 08:42 PM	#170
The Pitt Registered User Join Date: May 2009 Location: USA Posts: 36	Re: DBW pedal mounting bracket Hey Rob, sent you paypal for a Corvette Pedal Bracket. Much appreciated!

12-06-2019, 01:45 PM	#172
halfstep Senior Member Join Date: Feb 2015 Location: Maryland Posts: 248	Re: DBW pedal mounting bracket Rob - I just sent you PayPal $ for the Corvette bracket - thanks for making it. Paypal referenced protection if not family/gift - saw after the fact there is a fee for sender - did not say what it was. If an issue I will pay it. Thanks.

01-28-2020, 02:06 PM	#174
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 3,346	Re: DBW pedal mounting bracket Are these available? 72 k10 with a Corvette pedal. I saw a company selling a more elaborate bracket for the 67-72 trucks. I was told discontinued for the 71-72 trucks because the pedal does not sit right. Now only sold for 67-70 __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

02-03-2020, 01:08 AM	#175
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 3,346	Re: DBW pedal mounting bracket Did you get payment and shipping info? __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.