|
01-14-2019, 08:00 PM
|
#1 |
|
Registered User
Join Date: May 2011
Location: Texas
Posts: 984
|
Bearings
Took the #1 connecting rod bearing out today, trying to find correct size to order.
On bearings it reads, GM - (can't make it out, looks like 4 5) 18019665 5 H 4 2 Where do I go from here, I need this truck up and running before February what size bearings should I order to be safe, since these are from GM which tells me this engine hasn't been rebuilt before. As always thanks in advance.
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me. Don't mess with my truck, my momma or my money...not necessarily in that order. ©Stand for something or fall for anything. [LIST][*]'98 Bourbon St. Brawl ©2010
|
|
|
|
01-14-2019, 08:03 PM
|
#2 |
|
Registered User
Join Date: May 2011
Location: Texas
Posts: 984
|
Re: Bearings
Available Sizes: STD, 001, 010, 020, 030, 040 on eBay pretty cheap.
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me. Don't mess with my truck, my momma or my money...not necessarily in that order. ©Stand for something or fall for anything. [LIST][*]'98 Bourbon St. Brawl ©2010
|
|
|
|
|
01-14-2019, 08:24 PM
|
#3 |
|
Registered User
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
|
Re: Bearings
i might be wrong here but i was always under the impression spin a bearing = rework not just slap in a new one .
at least check and possible re-size the rod big end and maybe even new bolts and nuts .
__________________
77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. |
|
|
|
|
01-15-2019, 08:27 AM
|
#4 |
|
Registered User
Join Date: Oct 2013
Location: Maine
Posts: 2,375
|
Re: Bearings
If it was mine and the crank wasn't nicked or scratched, I would buy a set of standard bearings and a set of .001 undersize bearings and some plastigauge and use whatever bearing fit the best.
__________________
76 Chevy K20 76 GMC K15 77 Chevy C10 77 Chevy K10 |
|
|
|
01-16-2019, 10:20 AM
|
#5 |
|
Registered User
Join Date: Jan 2014
Location: Indpls. , IN
Posts: 795
|
Re: Bearings
Great bearing prices @ Competition Products.
If the old bearing had spun it's guaranteed that the big-end of the rod is out of round.
__________________
Tim K. 84 K30 srw Silverado 454 auto 85 C20 350 C6P auto flatbed 94 K1500 lifted shortbed 350 4 bbl NV4500 |
|
|
|
|
02-07-2019, 10:20 AM
|
#6 |
|
Registered User
Join Date: May 2011
Location: Texas
Posts: 984
|
Re: Bearings
Thanks for all replies!
Ok, so now my question is how bad does this bearing look, most of the rest have less scaring...I assumed they spun because of the ticking/tapping and some connecting rods are slightly loose.
__________________
Rest In Peace:Mikhail {Mickey Rooney} Alpha 2/5/13 Omega 7/22/14 10:28AM I love you tremendously and outragiously Superpuppi Thai Ridgeback...The most intelligent dog known to me. Don't mess with my truck, my momma or my money...not necessarily in that order. ©Stand for something or fall for anything. [LIST][*]'98 Bourbon St. Brawl ©2010
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
