bench seat slider tracks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Big Blue · 02-07-2019, 11:08 PM

Looking to purchase a set of bench seat slider tracks, I do not know what year I have now. Look at the pictures and you may be able to tell what year I need. I have one set but need another because I am putting in buckets from another vehicle. (not Chevy or GM). So I am making a seat bracket to put the seats on.

Thanks, John

**TKCR** · 02-08-2019, 06:14 AM

Well I have seen a lot of tracks, but your going to have to show the whole track. But only showing what you have shown, I would say one track is a truck. The other track might be a Suburban. But there is no way of saying what year, without seeing the whole track.
In the pic, left to right:
73-76
77-80
81-87
These are all trucks. Suburbans mounts are almost indentical, except for the angle of the mount to the floor, like your 2nd pic.

Big Blue · 02-08-2019, 10:04 AM

Thanks TKCR, I think the ones in the middle are the ones I need. 77 to 80. What are you asking for the set? Will you take Money Order?
Thank again, John

**TKCR** · 02-08-2019, 08:19 PM

Quote:

Originally Posted by Big Blue

Thanks TKCR, I think the ones in the middle are the ones I need. 77 to 80. What are you asking for the set? Will you take Money Order?
Thank again, John

Sending a PM.

Hammered 77 · 02-09-2019, 08:35 AM

TK, is there any difference in functional quality in the three set that you've seen?

Thanks
Rick

**TKCR** · 02-09-2019, 09:03 AM

Quote:

Originally Posted by Hammered 77

TK, is there any difference in functional quality in the three set that you've seen?

Thanks
Rick

No, they are all function pretty much the same. The only thing you need you to be aware of, is that the tracks must match the frame of the seat, for it to bolt up. All 3 of these tracks will bolt directly to the floor of any 73-87 cab.
For an example: You cannot use 77-80 tracks on a 73-76 or even a 81-87 frame. They won't fit, or bolt up. So the tracks must match the seat frame.
If your doing modifications, like Big Blue is, it won't matter.

Big Blue · 02-09-2019, 05:32 PM

TKCR, I will take the ones in the middle on the price you stated plus shipping. What is the Total cost then? I will send a money order, Please send your address.

Thanks Again John

**TKCR** · 02-10-2019, 10:59 AM

Quote:

Originally Posted by Big Blue

TKCR, I will take the ones in the middle on the price you stated plus shipping. What is the Total cost then? I will send a money order, Please send your address.

Thanks Again John

Sending PM for address & total cost.
The ones in the photo above, are long gone. That pic was taken awhile ago. I don't have any that have been sandblasted yet, so this is all I have available. They will need to be sandblasted, if you want then to look better.

Big Blue · 02-10-2019, 12:04 PM

I'll take the one in to second picture then.
John

**TKCR** · 02-10-2019, 12:10 PM

Quote:

Originally Posted by Big Blue

I'll take the one in to second picture then.
John

This set? They are for the 77-80. These are the just like the second set in the pic of post #2.

Big Blue · 02-10-2019, 10:30 PM

YES, DEM BE DA ONES.
Will send out money order out tomorrow evening.

John

Big Blue · 02-13-2019, 07:24 PM

Sent you a PM, Money order sent today.

John

02-07-2019, 11:08 PM	#1
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	bench seat slider tracks Looking to purchase a set of bench seat slider tracks, I do not know what year I have now. Look at the pictures and you may be able to tell what year I need. I have one set but need another because I am putting in buckets from another vehicle. (not Chevy or GM). So I am making a seat bracket to put the seats on. Thanks, John Attached Images __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

02-08-2019, 10:04 AM	#3
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: bench seat slider tracks Thanks TKCR, I think the ones in the middle are the ones I need. 77 to 80. What are you asking for the set? Will you take Money Order? Thank again, John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

02-09-2019, 08:35 AM	#5
Hammered 77 Registered User Join Date: Dec 2012 Location: Pendleton, Indiana Posts: 235	Re: bench seat slider tracks TK, is there any difference in functional quality in the three set that you've seen? Thanks Rick

02-09-2019, 05:32 PM	#7
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: bench seat slider tracks TKCR, I will take the ones in the middle on the price you stated plus shipping. What is the Total cost then? I will send a money order, Please send your address. Thanks Again John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

02-10-2019, 12:04 PM	#9
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: bench seat slider tracks I'll take the one in to second picture then. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

02-08-2019, 06:14 AM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,978	Re: bench seat slider tracks Well I have seen a lot of tracks, but your going to have to show the whole track. But only showing what you have shown, I would say one track is a truck. The other track might be a Suburban. But there is no way of saying what year, without seeing the whole track. In the pic, left to right: 73-76 77-80 81-87 These are all trucks. Suburbans mounts are almost indentical, except for the angle of the mount to the floor, like your 2nd pic. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

02-10-2019, 10:30 PM	#11
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: bench seat slider tracks YES, DEM BE DA ONES. Will send out money order out tomorrow evening. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.

02-13-2019, 07:24 PM	#12
Big Blue Registered User Join Date: Feb 2005 Location: Northeast--Bethlehem, Pennslyvania Posts: 642	Re: bench seat slider tracks Sent you a PM, Money order sent today. John __________________ Big Blue ( John ) 79 Chevy Pick up.....My Dailey STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.