ID WTB bed floor section for repair - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**landarts** · 02-20-2019, 03:52 PM

WTB bed floor section for repair here is what I am looking to repair. Thanks! Probably looking at 45x20 size

**Ironhorse** · 02-20-2019, 06:12 PM

Can you give some dimensions for your patch? I have several bed floor sections I offered on the parts board some time back but shipping usually kills any interest. Have three larg pieces.

**70STOVEBOLT** · 02-20-2019, 10:38 PM

I have one piece left from the thread below, see the last few posts

http://67-72chevytrucks.com/vboard/s...d.php?t=746101

Madkidd007 · 02-20-2019, 11:31 PM

Is the metal between the gaping holes eat up too? My thought is do two separate patches, would be a lot cheaper to get shipped and without cutting the center out it would end up bein no more welding than one big piece. Or hell since you’ll be cutting and welding anyways you could always get the patch size you need, have the shipper cut it in half and weld back together when you put it in.

**landarts** · 02-20-2019, 11:56 PM

Quote:

Originally Posted by Ironhorse

Can you give some dimensions for your patch? I have several bed floor sections I offered on the parts board some time back but shipping usually kills any interest. Have three larg pieces.

Probably looking for 45x20

**Ironhorse** · 02-21-2019, 12:18 AM

Quote:

Originally Posted by landarts

Probably looking for 45x20

The three large sections that I have are:
18'' x 50''
20'' x 50''
31'' x 72''

Can post pics of them tomorrow if interested in any of them. The pics are on another computer. Can cut as suggested for smaller package with patch weld involved or can ship in one large piece. LMK, thanks.

**landarts** · 02-21-2019, 09:07 AM

Would be interested in see the pictures, probably the 20x50.

projectking · 02-21-2019, 09:42 AM

I probably have what you need but shipping would be high. Send me your number and I’ll text you some pics.

**Ironhorse** · 02-21-2019, 09:50 AM

Quote:

Originally Posted by landarts

Would be interested in see the pictures, probably the 20x50.

Pics of the bed floor sections I have. As mentioned I can cut to make a smaller package size for shipping or leave as one piece. Shipping will be a factor I am sure. Always has been and just got worse on cost.

Pics show top side and under side. Bottom floor section is the 20 x 50. If want more close up pics let me know. No rust thru, just normal surface scale and flaking paint.

**Ironhorse** · 02-24-2019, 12:20 PM

landarts, any interest in the bed floor patches? Have not heard back on either patch shown in the pics.

**landarts** · 02-24-2019, 11:09 PM

yes the 20x50 bottom piece in the photo - possibly cut in half to make two 20x25 pieces shipped to 83669. Let me know what that would cost please.

**landarts** · 02-26-2019, 08:54 PM

Thanks everyone for the opportunity. I have decided to bight the bullet an place a large order for two trucks that need some replacement panels. Since I have to pay a flat fee for freight I will put the bed floor section on that order. Thanks everyone for responding, shipping fees kill these deals pretty fast.

02-20-2019, 03:52 PM	#1
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,415	WTB bed floor section for repair WTB bed floor section for repair here is what I am looking to repair. Thanks! Probably looking at 45x20 size Attached Images __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer Last edited by landarts; 02-20-2019 at 11:55 PM. Reason: forgot the size

02-20-2019, 06:12 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB bed floor section for repair Can you give some dimensions for your patch? I have several bed floor sections I offered on the parts board some time back but shipping usually kills any interest. Have three larg pieces. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-20-2019, 10:38 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB bed floor section for repair I have one piece left from the thread below, see the last few posts http://67-72chevytrucks.com/vboard/s...d.php?t=746101 __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

02-20-2019, 11:31 PM	#4
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,237	Re: WTB bed floor section for repair Is the metal between the gaping holes eat up too? My thought is do two separate patches, would be a lot cheaper to get shipped and without cutting the center out it would end up bein no more welding than one big piece. Or hell since you’ll be cutting and welding anyways you could always get the patch size you need, have the shipper cut it in half and weld back together when you put it in. __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

02-21-2019, 09:07 AM	#7
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,415	Re: WTB bed floor section for repair Would be interested in see the pictures, probably the 20x50. __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

02-21-2019, 09:42 AM	#8
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB bed floor section for repair I probably have what you need but shipping would be high. Send me your number and I’ll text you some pics. __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

02-24-2019, 12:20 PM	#10
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB bed floor section for repair landarts, any interest in the bed floor patches? Have not heard back on either patch shown in the pics. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-24-2019, 11:09 PM	#11
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,415	Re: WTB bed floor section for repair yes the 20x50 bottom piece in the photo - possibly cut in half to make two 20x25 pieces shipped to 83669. Let me know what that would cost please. __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer

02-26-2019, 08:54 PM	#12
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,415	Re: WTB bed floor section for repair Thanks everyone for the opportunity. I have decided to bight the bullet an place a large order for two trucks that need some replacement panels. Since I have to pay a flat fee for freight I will put the bed floor section on that order. Thanks everyone for responding, shipping fees kill these deals pretty fast. __________________ Super Cheyenne aka the "Devil Cowboy" 71 K20 Idaho Edition 69 K10 from the Field 68 Second Chance Fix and Sale 72 GMC 3/4 ton 4x4 K2500 The "Fixrupr" build thread 72 Cheyenne 1/2 ton " FIXRUPR " - daily driver 67 C20 all original paint 71 K20 Custom 4x4 (Idaho Edition) 72 K20 GMC Super Custom 4x4 72 K20 Custom Deluxe 4x4 69 K10 Custom package 4x4 (69 K10 from the field) 72 K10 Custom 71 K10 Custom 72 K20 Custom Deluxe 4x4 72 K20 Crew Cab Project 71 GMC Jimmy CST 72 Blazer 70 Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.