Drop spindle typical problem... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**spudder** · 03-07-2019, 04:43 PM

Helping friend with his '65 truck project. We installed a set of dropped spindles for '73-'87 last week. Just finished up the brake lines today. Went to mount the 15x8 5 lug factory rallys and the wheels are rubbing the lower control arms.
I've read somewhere about trimming the control arms for clearance. Also read about it weakening the area around the ball joints.
What is the solution with running 15 inch wheels?
Absolutely want to stay with 15 wheels.

Does anyone make a 2 inch dropped spindle? Just dropping the truck with spindles in front and 3 inch coils in back. No lower.
Thanks for your help.

chevy_mike · 03-07-2019, 06:52 PM

Yes, CPP makes 2" drop modular spindles, that do not have this problem. This is why I recommend these instead of the normal 2.5" ones that most sell.

Here is with 15x8" 4.5" back space later GM factory wheels. 2" spindles will clear the arm

**PGSigns** · 03-08-2019, 08:02 AM

I had to grind both my lowers to clear the 15X8 wheels. Whne I went to the smoothy wheels I got 15X7 for the front and a 225 tire and the clearance was much better.
Jimmy

Robert Haas · 03-08-2019, 11:28 AM

It is a pretty simple fix to cut reliefs in the lower control arm and weld in a couple plates to re-establish the factory strength. I have done several over the years.

verdell · 03-08-2019, 01:42 PM

I ran 15 inch smoothies with Western Chassis spindles. Didn't have this issue with mine either.

03-07-2019, 04:43 PM	#1
spudder Active Member Join Date: Aug 2012 Location: Central Illinois Posts: 103	Drop spindle typical problem... Helping friend with his '65 truck project. We installed a set of dropped spindles for '73-'87 last week. Just finished up the brake lines today. Went to mount the 15x8 5 lug factory rallys and the wheels are rubbing the lower control arms. I've read somewhere about trimming the control arms for clearance. Also read about it weakening the area around the ball joints. What is the solution with running 15 inch wheels? Absolutely want to stay with 15 wheels. Does anyone make a 2 inch dropped spindle? Just dropping the truck with spindles in front and 3 inch coils in back. No lower. Thanks for your help.

03-07-2019, 06:52 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Drop spindle typical problem... Yes, CPP makes 2" drop modular spindles, that do not have this problem. This is why I recommend these instead of the normal 2.5" ones that most sell. Here is with 15x8" 4.5" back space later GM factory wheels. 2" spindles will clear the arm __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

03-08-2019, 08:02 AM	#3
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Drop spindle typical problem... I had to grind both my lowers to clear the 15X8 wheels. Whne I went to the smoothy wheels I got 15X7 for the front and a 225 tire and the clearance was much better. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

03-08-2019, 11:28 AM	#4
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Re: Drop spindle typical problem... It is a pretty simple fix to cut reliefs in the lower control arm and weld in a couple plates to re-establish the factory strength. I have done several over the years.

03-08-2019, 01:42 PM	#5
verdell Registered User Join Date: Feb 2013 Location: Columbus, MS Posts: 445	Re: Drop spindle typical problem... I ran 15 inch smoothies with Western Chassis spindles. Didn't have this issue with mine either.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.