1963 suburban quarter panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Radrick70 · 03-11-2019, 02:51 PM

Hello, I'm working on a 63 suburban and the driver side quarter panel needs replaced. The passenger side just needs the bottom portion. I've been looking for the replacement panels, but to no avail. Does anyone know where I can get these?
Any help would be appreciated.

Thanks
RadRick70

chevy_mike · 03-11-2019, 05:25 PM

They are not available. Most people have used parts from a pickup bed panel but there are areas that are different and will have to be hand made or cut from another vehicle.

Radrick70 · 03-12-2019, 08:56 AM

Thanks Chevy Mike. I was thinking that they don't make the quarter panels and I was thinking the same thing with the bed side after looking for days. Lol. I just wanted to verify.

Thanks again.

AJCK87 · 03-15-2019, 02:38 PM

I used new full patch panels for the 8’ fleet side, in two pieces so front and back sections. This offered the most new material to work with for my 10 1/2’ panel truck. For the rear corner, I had to cut one off a Suburban, still had to patch this piece. Takes loads of time to do but well worth it in the end. Pretty happy with how it turned out.

03-11-2019, 02:51 PM	#1
Radrick70 Registered User Join Date: Feb 2019 Location: Harrah, OK Posts: 2	1963 suburban quarter panels Hello, I'm working on a 63 suburban and the driver side quarter panel needs replaced. The passenger side just needs the bottom portion. I've been looking for the replacement panels, but to no avail. Does anyone know where I can get these? Any help would be appreciated. Thanks RadRick70

03-11-2019, 05:25 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 1963 suburban quarter panels They are not available. Most people have used parts from a pickup bed panel but there are areas that are different and will have to be hand made or cut from another vehicle. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

03-12-2019, 08:56 AM	#3
Radrick70 Registered User Join Date: Feb 2019 Location: Harrah, OK Posts: 2	Re: 1963 suburban quarter panels Thanks Chevy Mike. I was thinking that they don't make the quarter panels and I was thinking the same thing with the bed side after looking for days. Lol. I just wanted to verify. Thanks again.

03-15-2019, 02:38 PM	#4
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: 1963 suburban quarter panels I used new full patch panels for the 8’ fleet side, in two pieces so front and back sections. This offered the most new material to work with for my 10 1/2’ panel truck. For the rear corner, I had to cut one off a Suburban, still had to patch this piece. Takes loads of time to do but well worth it in the end. Pretty happy with how it turned out. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.