Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-17-2019, 08:33 PM | #1 |
Registered User
Join Date: Jul 2018
Location: FL and WV
Posts: 135
|
Re: Big Block Headers in a 4x4 Blazer
Header nightmare is now over!! I had to slightly modify the after market crossmember frame bracket and I also trimmed about 1/4" off the top frame. I believe that if you have an OEM crossmember/mounts, these headers will bolt right up! Very stout and top of the line headers with 2" tubes, 14 gauge and 3/8" flange ground smooth.
As I stated/shown previously, they have plenty of room between the leaf spring shackles. I hope this helps someone.
__________________
72' JIMMY 454 |
Bookmarks |
|
|