AR WTB driver side fender cup

[KMC3420]

Fingers crossed that someone has a rust free front fender cup for a 67-72 drivers side fender. I need just above the body line. Thanks.

Picture below for reference, but I need the drivers side cut which is not reproduced. Thanks.

[nightrider388]

Maybe someone has a wrecked fender you can get it off of. There are half fender patches that some vendors carry but they are about the same as a new fender. I bought new fenders for my truck and if they fit too bad, i will use them as patch panels.

[nightrider388]

Is that your actual fender or just an example? It looks like it would need the inner structure too.

[KMC3420]

That is just a picture for reference and yes, I will need the inner and outer part of the cup. I do not see that the driver side is made aftermarket.

[zicc1835]

ill take a look tomorrow at a fender I have not sure of condition of the cup

[KMC3420]

Originally Posted by zicc1835

ill take a look tomorrow at a fender I have not sure of condition of the cup

Thank you. Please let me know.

[zicc1835]

have 3 driver side fenders 2 had rust thru this is the best with no rust thru but was worked by P O and I took a lot of the bondo off and it appears they were just smothing it from dents I took much off so you could see and decide inside looks good took penty pics you decide where i cut it and where you would graft it is plenty solid 40.00 plus ship + PP fees 3% if you want me to take anymore bondo off it will be saturday or sunday before I can i think i have one more pic

[zicc1835]

Originally Posted by zicc1835

have 3 driver side fenders 2 had rust thru this is the best with no rust thru but was worked by P O and I took a lot of the bondo off and it appears they were just smothing it from dents I took much off so you could see and decide inside looks good took penty pics you decide where i cut it and where you would graft it is plenty solid 40.00 plus ship + PP fees 3% if you want me to take anymore bondo off it will be saturday or sunday before I can i think i have one more pic

one more or two more

[70shortfleet]

I think I have a very nice one in the attic if you haven't found one yet, let me know if you are interested in some pictures of it.

[KMC3420]

Originally Posted by 70shortfleet

I think I have a very nice one in the attic if you haven't found one yet, let me know if you are interested in some pictures of it.

Thanks. PM sent.

[Willie Makeit]

Don't want to jump in and hijack anyones thread, but I'd be interested in one once KMC has his picked out.

[zicc1835]

Im good with whatever KMC decides .......and we will go from there

[davischevy]

BTW, I looked and I don't have one.

[KMC3420]

Originally Posted by davischevy

BTW, I looked and I don't have one.

Thanks sir, I appreciate that. I see you cruising in that blue/white GMC. Looks good.

[zicc1835]

Originally Posted by Willie Makeit

Don't want to jump in and hijack anyones thread, but I'd be interested in one once KMC has his picked out.

Give me a couple days to get back home KMC has passed went with 70 short fleet I want to clean most of the bondo off take some additional pictures if your still interested

[Willie Makeit]

I'm interested if i can see it in bare metal. thanks!

[zicc1835]

I’ll get it in the blast cabinet clean it up

[zicc1835]

good news no rust thru... bad news lots of drill holes I guess PO used to pull dents or hold the bondo..not sure if your a metal guy and want to take the time to fill em....with the mig...? its structurally sound ..i have a few more pics

[zicc1835]

more of the same

[Willie Makeit]

PM sent