LS Swap Crossmember choices - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Blazerowner** · 03-23-2019, 07:51 PM

The differential cover is a TA performance cover. I have them front and back. Nice covers and made in the USA. I will mention the bolts it came with did not fit. I had to cut them all because they were too long. Kind of odd thing. The rear is a 12 bolt not Dana 44.
Part number for the front is TA-1814.

I used an ORD adapter and they built me an np205 with the proper input for the 4l80. The 4l60 will be a piece of cake. It’s shorter and the crossmember has plenty of adjustment.

03-23-2019, 07:51 PM	#1
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,969	Re: LS Swap Crossmember choices The differential cover is a TA performance cover. I have them front and back. Nice covers and made in the USA. I will mention the bolts it came with did not fit. I had to cut them all because they were too long. Kind of odd thing. The rear is a 12 bolt not Dana 44. Part number for the front is TA-1814. I used an ORD adapter and they built me an np205 with the proper input for the 4l80. The 4l60 will be a piece of cake. It’s shorter and the crossmember has plenty of adjustment. __________________ Kirk 72 Blazer CST 4wd highlander Last edited by Blazerowner; 03-23-2019 at 08:12 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.