Floormat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Noah96 · 03-12-2019, 05:30 PM

Read several reviews but who makes the best repo floormat. Saw that brothers has their spring sale going on and has them marked down 50$. Thought about picking one up. I know it wont be as good as the original ones but need something.

**Stocker** · 03-12-2019, 07:43 PM

That's not a bad price. Wish I could tell you who makes a good mat but I haven't found one yet. FWIW, my last rubber mat came from Brothers. It started falling apart after four years. Good luck.

**Grumpy old man** · 03-12-2019, 08:37 PM

$129.00 at truck shop in NC page 37

https://issuu.com/truckandcarshop/docs/ts_60-72_web

67swb72klb · 03-12-2019, 08:45 PM

I have had my share of junk from LMC but the mat I bought from them is almost 9 years old and is still in great condition no cracking or rot yet. I was just in the truck cleaning up up the floors and sills..

lutronjim · 03-12-2019, 10:19 PM

Grumpy old man

What is connection with NC and Orange CA rag? Just curious.
Love to support local or near vendors.

Thanks

**Grumpy old man** · 03-12-2019, 10:30 PM

Quote:

Originally Posted by lutronjim

Grumpy old man

What is connection with NC and Orange CA rag? Just curious.
Love to support local or near vendors.

Thanks

same company two locations .

I've noticed a few Ca shops moving here .

http://www.truckandcarshop.com/index.html

Tallguy · 03-13-2019, 09:25 AM

I have no knowledge about the quality of their floor mats but I highly recommend checking out "The Truck Shop" in Orange CA and also in North Carolina. I've been ordering parts from them for the last few years. They ship fast, are knowledgeable and almost always have better prices.
I have no affiliation with them, but almost always get my parts from them.

89AKurt · 03-13-2019, 02:20 PM

I've been tempted to get a mat, to cover the rust holes. LOL

**'68OrangeSunshine** · 03-13-2019, 05:54 PM

My LMC mat started coming apart after only a few years. Definite junk. I used the floormat rug from a Circle K store for years. Put a hole in the ''K'' for the shift lever. But even that started decomposing. I think if I tried powerwashing it it would dissolve.
Has anyone tried the MIP [molded injection polyvinyl] mat? Not sure if it's even availble anymore.

Noah96 · 03-16-2019, 09:29 AM

Thanks for all the input im going to check out orangeco.

flashed · 03-16-2019, 12:21 PM

The MIP Poly Vinyl floormat is all I will use . Have one in my 72 that is about 8 years old and cleans up like new , its black . I just ordered a Blue one for my 70 for when it comes home soon from getting rust repair . These cover the complete floor and are very thick . Made by ACC .

**'68OrangeSunshine** · 03-16-2019, 03:09 PM

Quote:

Originally Posted by flashed

The MIP Poly Vinyl floormat is all I will use . Have one in my 72 that is about 8 years old and cleans up like new , its black . I just ordered a Blue one for my 70 for when it comes home soon from getting rust repair . These cover the complete floor and are very thick . Made by ACC .

Sounds cool. Who did you buy it from?

renegade6 · 03-16-2019, 07:41 PM

The vinyl floor mats are awesome. I purchased directly from ACC. One recommendation is to do it on a very hot day. Set the mat in the sun, soften up and then install.

Hotcorner · 03-16-2019, 07:55 PM

Just bought the MIP from LMC. It’s thick.

Wish me luck with the installation.

flashed · 03-17-2019, 12:08 AM

I bought mine from Stock Interiors .

palallin · 03-17-2019, 06:00 PM

Quote:

Originally Posted by 67swb72klb

I have had my share of junk from LMC but the mat I bought from them is almost 9 years old and is still in great condition no cracking or rot yet. I was just in the truck cleaning up up the floors and sills..

Same story on mine except that it is 14 years old and more.

**'68OrangeSunshine** · 03-17-2019, 06:15 PM

Quote:

Originally Posted by Hotcorner

Just bought the MIP from LMC. It’s thick.

Wish me luck with the installation.

Got a part number?

Astro-Balls · 03-17-2019, 06:22 PM

The rubber Mat from Cooper Restoration fits great and wears well.
https://cooperrestorations.com/produ...ber-floor-mat/

Hotcorner · 03-17-2019, 06:44 PM

Quote:

Originally Posted by '68OrangeSunshine

Got a part number?

38-2937 for high hump. 38-2936 for low hump. Page 96 of current catalog. 1/8 thick industrial polyvinyl. It’s heavy stuff and should last.

The downside is it has to be laid out in a warm place for a couple days to lose the creases etc from being in the box. Garage isn’t heated.

**'68OrangeSunshine** · 03-17-2019, 06:49 PM

Quote:

Originally Posted by Hotcorner

38-2937 for high hump. 38-2936 for low hump. Page 96 of current catalog. 1/8 thick industrial polyvinyl.

Thanks.

flashed · 03-17-2019, 08:29 PM

It is also available in limited colors other than Black , the Poly Vinyl one . My last one I ordered in Blue for my Blue Stepper .

**'68OrangeSunshine** · 03-17-2019, 08:41 PM

Looks like the MIP mat is the same price as carpet and only $30-40 bucks more than their self-destructing rubber floormat.

**3757chevy** · 03-17-2019, 09:02 PM

Quote:

Originally Posted by Astro-Balls

The rubber Mat from Cooper Restoration fits great and wears well.
https://cooperrestorations.com/produ...ber-floor-mat/

That's the style I want to find for a Blazer , it needs to cover under the seats to the step wall.

**lks dcvn** · 03-26-2019, 01:29 PM

^ - also looking for a decent blazer floor mat that will last.

03-12-2019, 05:30 PM	#1
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 267	Floormat Read several reviews but who makes the best repo floormat. Saw that brothers has their spring sale going on and has them marked down 50$. Thought about picking one up. I know it wont be as good as the original ones but need something.

03-12-2019, 07:43 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,722	Re: Floormat That's not a bad price. Wish I could tell you who makes a good mat but I haven't found one yet. FWIW, my last rubber mat came from Brothers. It started falling apart after four years. Good luck. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

03-12-2019, 08:37 PM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Floormat $129.00 at truck shop in NC page 37 https://issuu.com/truckandcarshop/docs/ts_60-72_web __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

03-12-2019, 08:45 PM	#4
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,471	Re: Floormat I have had my share of junk from LMC but the mat I bought from them is almost 9 years old and is still in great condition no cracking or rot yet. I was just in the truck cleaning up up the floors and sills.. __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

03-12-2019, 10:19 PM	#5
lutronjim Registered User Join Date: Dec 2013 Location: Dunwoody,Ga Posts: 443	Re: Floormat Grumpy old man What is connection with NC and Orange CA rag? Just curious. Love to support local or near vendors. Thanks

03-13-2019, 09:25 AM	#7
Tallguy Registered User Join Date: Nov 2018 Location: Brentwood Ca Posts: 16	Re: Floormat I have no knowledge about the quality of their floor mats but I highly recommend checking out "The Truck Shop" in Orange CA and also in North Carolina. I've been ordering parts from them for the last few years. They ship fast, are knowledgeable and almost always have better prices. I have no affiliation with them, but almost always get my parts from them.

03-13-2019, 02:20 PM	#8
89AKurt Registered User Join Date: Dec 2015 Location: Prescott Arizona Posts: 621	Re: Floormat I've been tempted to get a mat, to cover the rust holes. LOL __________________ 1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet

03-13-2019, 05:54 PM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Floormat My LMC mat started coming apart after only a few years. Definite junk. I used the floormat rug from a Circle K store for years. Put a hole in the ''K'' for the shift lever. But even that started decomposing. I think if I tried powerwashing it it would dissolve. Has anyone tried the MIP [molded injection polyvinyl] mat? Not sure if it's even availble anymore. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

03-16-2019, 09:29 AM	#10
Noah96 Registered User Join Date: Aug 2016 Location: Danville Wv Posts: 267	Re: Floormat Thanks for all the input im going to check out orangeco.

03-16-2019, 12:21 PM	#11
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Floormat The MIP Poly Vinyl floormat is all I will use . Have one in my 72 that is about 8 years old and cleans up like new , its black . I just ordered a Blue one for my 70 for when it comes home soon from getting rust repair . These cover the complete floor and are very thick . Made by ACC .

03-16-2019, 07:41 PM	#13
renegade6 Registered User Join Date: Nov 2008 Location: Texarkana, TX Posts: 443	Re: Floormat The vinyl floor mats are awesome. I purchased directly from ACC. One recommendation is to do it on a very hot day. Set the mat in the sun, soften up and then install. __________________ Brandon 63 Biscayne https://www.pro-touring.com/threads/90718-63-Biscayne 57 Chevy Truck (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=321380 72 K20 Long bed stepside (wife's) 72 K20 Long bed 396 (flip or keep...?) The latest build: http://67-72chevytrucks.com/vboard/s...76#post8438476

03-16-2019, 07:55 PM	#14
Hotcorner Registered User Join Date: Apr 2017 Location: Knoxville, Tennessee Posts: 892	Re: Floormat Just bought the MIP from LMC. It’s thick. Wish me luck with the installation. __________________ 1969 GMC K25 2007 Chevy 2500HD Classic Duramax 1999 Tahoe 2DR 4WD Base Model 5.7l Last edited by Hotcorner; 03-16-2019 at 09:26 PM.

03-17-2019, 12:08 AM	#15
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Floormat I bought mine from Stock Interiors .

03-17-2019, 06:22 PM	#18
Astro-Balls Registered User Join Date: Feb 2019 Location: Nor Cal Posts: 822	Re: Floormat The rubber Mat from Cooper Restoration fits great and wears well. https://cooperrestorations.com/produ...ber-floor-mat/

03-17-2019, 08:29 PM	#21
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Floormat It is also available in limited colors other than Black , the Poly Vinyl one . My last one I ordered in Blue for my Blue Stepper .



Register or Log In To remove these advertisements.

03-17-2019, 08:41 PM	#22
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Floormat Looks like the MIP mat is the same price as carpet and only $30-40 bucks more than their self-destructing rubber floormat. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

03-26-2019, 01:29 PM	#24
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Floormat ^ - also looking for a decent blazer floor mat that will last.

Register or Log In To remove these advertisements.