Installing inner fender seals to firewall 1960-66 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 03-27-2019, 06:56 PM

The clips called 'retainers' in the drawing are the same for all of them. The wire 'staples' are the same also.

Johns 66 · 03-27-2019, 07:11 PM

Quote:

Originally Posted by The Rocknrod

The clips called 'retainers' in the drawing are the same for all of them. The wire 'staples' are the same also.

Thanks for the info...Do you have any idea where I can buy the metal piece and the retainers...I called the Truck Shop and the guy I talked with was clueless because I didn't have part numbers.

**Submariner616** · 03-27-2019, 07:18 PM

Quote:

Originally Posted by Johns 66

Thanks for the info...Do you have any idea where I can buy the metal piece and the retainers...I called the Truck Shop and the guy I talked with was clueless because I didn't have part numbers.

Look on this page. The retainer clips are on it and the seals are as well:

https://www.classicparts.com/Fender-Hood/products/236/

Johns 66 · 03-27-2019, 07:25 PM

Quote:

Originally Posted by Submariner616

Look on this page. The retainer clips are on it and the seals are as well:

https://www.classicparts.com/Fender-Hood/products/236/

Awesome...Thanks So Much.....John

03-27-2019, 06:56 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Installing inner fender seals to firewall 1960-66 C10 The clips called 'retainers' in the drawing are the same for all of them. The wire 'staples' are the same also. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.