47-55.1 48 windshield center bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 04-03-2019, 11:02 AM

My 48 cab does not have the inner center windshield brace for the 2-piece windshield on the cab. I've looked in my 1947-1954 Truck Factory Assembly Manual, and I've not found how it is installed. I think it is welded in.

If you have link or a picture I would like to see a picture of how it is installed I would appreciate it.

Thanks.

MARTINSR · 04-03-2019, 11:33 AM

Quote:

Originally Posted by 8man

My 48 cab does not have the inner center windshield brace for the 2-piece windshield on the cab. I've looked in my 1947-1954 Truck Factory Assembly Manual, and I've not found how it is installed. I think it is welded in.

If you have link or a picture I would like to see a picture of how it is installed I would appreciate it.

Thanks.

If someone doesn't beat me to it I will post a photo. Yep, it was just welded in on the back side. I kinda remember it being wedged between the inner and outer panel but I will get a photo.

Brian

**8man** · 04-03-2019, 11:48 AM

Thank you.

It looks like it has to be placed so that the holes line up so the trim pieces fit in correctly. I may have to get all 3 pieces to line it up properly so I can weld it in. Since I replaced the dash, there wasn't a piece there, but at the top of the windshield there appears to be a piece between the inner and outer cab at the "V", just like you said.

**mr48chev** · 04-04-2019, 08:41 PM

Welded on the inside on the top and the outside on the bottom.

The center of the top hole is right at 3/4 inch dow from that little lip.

The hole for the mirror goes towards the top.

Wife is dragging me out the door to seafood night at the casino.

**8man** · 04-05-2019, 08:33 AM

Thank you! That is just what I needed.

04-03-2019, 11:02 AM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,339	48 windshield center bar My 48 cab does not have the inner center windshield brace for the 2-piece windshield on the cab. I've looked in my 1947-1954 Truck Factory Assembly Manual, and I've not found how it is installed. I think it is welded in. If you have link or a picture I would like to see a picture of how it is installed I would appreciate it. Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

04-03-2019, 11:48 AM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,339	Re: 48 windshield center bar Thank you. It looks like it has to be placed so that the holes line up so the trim pieces fit in correctly. I may have to get all 3 pieces to line it up properly so I can weld it in. Since I replaced the dash, there wasn't a piece there, but at the top of the windshield there appears to be a piece between the inner and outer cab at the "V", just like you said. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

04-04-2019, 08:41 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,555	Re: 48 windshield center bar Welded on the inside on the top and the outside on the bottom. The center of the top hole is right at 3/4 inch dow from that little lip. The hole for the mirror goes towards the top. Wife is dragging me out the door to seafood night at the casino. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

04-05-2019, 08:33 AM	#5
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,339	Re: 48 windshield center bar Thank you! That is just what I needed. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.