Another wiper motor question

[HIGHWAY BY THE SEA]

Originally Posted by sKnNyPpY

Did you remove the three bolts from the motor under the dash? Just did this myself yesterday. After removing them I gave the motor spindle a tap with a hammer and it came loose. I had to reuse two bushings off the old motor too.

Thanks for the replies from all. The hammer-tap idea worked, after I left it soaked in PB Blaster for a week. Now I must figure out why the newly-installed wiper motor and pump does not work...? Ground probably.

[LockDoc]

Originally Posted by HIGHWAY BY THE SEA

Thanks for the replies from all. The hammer-tap idea worked, after I left it soaked in PB Blaster for a week. Now I must figure out why the newly-installed wiper motor and pump does not work...? Ground probably.

Can you get a picture of the wiper motor and the wiring under the dash? You don't have the wiper switch removed or loose in the dash do you?

See if this thread helps at all:

http://67-72chevytrucks.com/vboard/s...d.php?t=413551

LockDoc


LockDoc

[HIGHWAY BY THE SEA]

Originally Posted by LockDoc

Can you get a picture of the wiper motor and the wiring under the dash? You don't have the wiper switch removed or loose in the dash do you?

See if this thread helps at all:

http://67-72chevytrucks.com/vboard/s...d.php?t=413551

LockDoc


LockDoc

Here are pictures that I took tonight.

[LockDoc]

Originally Posted by HIGHWAY BY THE SEA

Here are pictures that I took tonight.

I'm not seeing the Black wire on the third terminal on the motor. It must be hanging under there somewhere..... Check this picture out.

LockDoc