OR 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**TBONE1964** · 01-17-2018, 09:27 PM

Here we have a tach cluster put together from various parts I have had accumulating in the shop.

Bezel is new aftermarket for 67 but also works in a 68.
Speedometer is from a 71 and has been checked for noise, needle bounce and accuracy up to 100 MPH. It is a good one with odometer reset to zero.

Tach is also it's own mutt with parts from different tachs. The face has been restored and has minor pitting which is hard to see unless looking for it. The tach has been tested and does seem to work well. I questioned it because it did not test well before I cleaned it up.

Most of the other gauges are 71 gauges and came from a nice core.

It will come with a nice 80 lb oil pressure gauge.

I have installed LED's for illumination.

The circuit board is OE and is nice and functional.

The lens is also OE and has a couple of blemishes. One is near the 5 on the tach portion. I buffed most of it out but there is still a glimpse of it and I don't want to jeopardize the lettering/numbering on the lens to get it completely off.

I am going to ask $450.00 plus shipping for this one. It has been completely tested as it would be wired in your truck. All you need to do is install and enjoy.

Thank you for looking. Remember I can add a volt gauge conversion, swap the 80 lb with a 60 lb if needed and put 168 bulbs in place of LED's.

Also let me know if interested in having your own cluster restored, tach, non tach. I can add volt gauge conversions and clocks as well. I am selling parts (limited to current inventory) as do individual repairs on speedometers, tachs and gauges, etc. Bezel can also be switched so this will work in a 69-72 truck.

Take care,
Tom

**too much stuff** · 01-17-2018, 11:10 PM

Looks nice!

**TBONE1964** · 01-20-2018, 04:13 PM

TTT,

I have had some offers on this elsewhere. I will accept offers on it but looking to get at least $400.00 plus shipping.

Thank you and have a good weekend.

Also will be listing a restored 67/68 style bezel tach cluster with my volt gauge conversion soon.

Please remember I can swap bezels on these clusters to whatever is wanted, 69-72 style, black with chrome or wood grain, etc

Take care,
Tom

**undertaker72** · 01-21-2018, 09:25 AM

excellent work , looks very nice

russgoodman · 01-25-2018, 07:13 PM

Tom, would you take $350 shipped with the Volt gauge conversion and a 69-72 bezel? I lost out on this one to Leon in June by 6 minutes that would have been for $350 shipped http://67-72chevytrucks.com/vboard/s...d.php?t=739143

I am using a AAW harness, so I do need the volt gauge conv right??

**yote1234** · 01-25-2018, 08:11 PM

P u r d y !

**TBONE1964** · 01-25-2018, 10:30 PM

Quote:

Originally Posted by russgoodman

Tom, would you take $350 shipped with the Volt gauge conversion and a 69-72 bezel? I lost out on this one to Leon in June by 6 minutes that would have been for $350 shipped http://67-72chevytrucks.com/vboard/s...d.php?t=739143

I am using a AAW harness, so I do need the volt gauge conv right??

I am sorry but I cannot sell the cluster for that price. With a volt gauge conversion added, this particular cluster will be $500.00 plus shipping. Something I normally sell for $650.00. Like I mentioned, it is not a perfect restoration but functions like new. I would also change the bezel to a 69-72 style for the $500.00 price.

The cluster Leon bought did not have a circuit board and a questionable tach if I remember correctly.

It depends on which harness you have from AAW but yes there is one that does not support the stock amp gauge.

Thank you for the interest,
Tom

**TBONE1964** · 01-25-2018, 10:31 PM

Quote:

Originally Posted by yote1234

P u r d y !

Thank you friend

russgoodman · 01-25-2018, 10:42 PM

Quote:

Originally Posted by TBONE1964

I am sorry but I cannot sell the cluster for that price. With a volt gauge conversion added, this particular cluster will be $500.00 plus shipping. Something I normally sell for $650.00. Like I mentioned, it is not a perfect restoration but functions like new. I would also change the bezel to a 69-72 style for the $500.00 price.

The cluster Leon bought did not have a circuit board and a questionable tach if I remember correctly.

It depends on which harness you have from AAW but yes there is one that does not support the stock amp gauge.

Thank you for the interest,
Tom

I will think about it. The cluster Leon got you offered to add a new tach and circuit to it for $175 extra. But I forgot that was for repro stuff. My bad. The Aaw harness is the factory replacement style.

**TBONE1964** · 01-28-2018, 11:11 AM

TTT

I have sold the 80 lb gauge from this cluster and installed a very nice 60 lb gauge (tested for function and accuracy. I do have an 80 lb gauge that needs face restoration if someone needs an 80 lb gauge with this cluster. I can also add a clock to it for an additional charge.

I have a dozen 69-72 black/chrome bezels on the way if it needs to be swapped to that style.

Price is $400.00 shipped within the CON US.

It is ready to ship as is or wait until new bezels arrive.

Thank you for looking,
Tom

**mrtoni** · 01-30-2018, 08:06 PM

I'd do the 400 shipped with a 72 bezel. Do you have wiring pigtails by chance? My burb arrived with dash apart and 3 gauges no bezel hanging wires. Matt

**TBONE1964** · 01-30-2018, 10:09 PM

Quote:

Originally Posted by mrtoni

I'd do the 400 shipped with a 72 bezel. Do you have wiring pigtails by chance? My burb arrived with dash apart and 3 gauges no bezel hanging wires. Matt

Hi Matt,

I will send you a PM with payment information. Yes I should have a pigtail to throw in with it.

Thank you very much,
Tom

**TBONE1964** · 02-04-2018, 04:57 PM

Quote:

Originally Posted by mrtoni

I'd do the 400 shipped with a 72 bezel. Do you have wiring pigtails by chance? My burb arrived with dash apart and 3 gauges no bezel hanging wires. Matt

Hi Matt,

Just wondering if you are still interested. I have not seen your payment?

Let me know.

Thank you,
Tom

**TBONE1964** · 02-06-2018, 10:26 PM

Cluster is SOLD,

Thank you mrtoni

C10_ustacould · 02-10-2018, 03:52 PM

Dang it! I was scrolling down hoping this was still available!

72 Chevy Trucks · 02-11-2018, 03:35 AM

DO you have any 80 lb. oil gauges that you will sell separately? I am looking for a nice 80 lb. gauge shipped to 27406.

Thanks... Steve

Oddfire · 02-11-2018, 06:54 AM

Nice looking piece! Tom your work is 2nd to none!

**TBONE1964** · 02-11-2018, 04:39 PM

Quote:

Originally Posted by 72 Chevy Trucks

DO you have any 80 lb. oil gauges that you will sell separately? I am looking for a nice 80 lb. gauge shipped to 27406.

Thanks... Steve

Hi Steve,

Sorry I do not have any currently for sale but they do come up from time to time.

Thank you,
Tom

**TBONE1964** · 02-11-2018, 04:39 PM

Quote:

Originally Posted by Oddfire

Nice looking piece! Tom your work is 2nd to none!

Always appreciate the kind words

Baker72chevy · 03-08-2019, 05:44 PM

What color is the gaug arms

**TBONE1964** · 05-04-2019, 05:30 PM

Quote:

Originally Posted by Baker72chevy

What color is the gaug arms

Krylon Short Cuts fluorescent orange. If you are referring to the gauge needles.

01-17-2018, 09:27 PM	#1
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Here we have a tach cluster put together from various parts I have had accumulating in the shop. Bezel is new aftermarket for 67 but also works in a 68. Speedometer is from a 71 and has been checked for noise, needle bounce and accuracy up to 100 MPH. It is a good one with odometer reset to zero. Tach is also it's own mutt with parts from different tachs. The face has been restored and has minor pitting which is hard to see unless looking for it. The tach has been tested and does seem to work well. I questioned it because it did not test well before I cleaned it up. Most of the other gauges are 71 gauges and came from a nice core. It will come with a nice 80 lb oil pressure gauge. I have installed LED's for illumination. The circuit board is OE and is nice and functional. The lens is also OE and has a couple of blemishes. One is near the 5 on the tach portion. I buffed most of it out but there is still a glimpse of it and I don't want to jeopardize the lettering/numbering on the lens to get it completely off. I am going to ask $450.00 plus shipping for this one. It has been completely tested as it would be wired in your truck. All you need to do is install and enjoy. Thank you for looking. Remember I can add a volt gauge conversion, swap the 80 lb with a 60 lb if needed and put 168 bulbs in place of LED's. Also let me know if interested in having your own cluster restored, tach, non tach. I can add volt gauge conversions and clocks as well. I am selling parts (limited to current inventory) as do individual repairs on speedometers, tachs and gauges, etc. Bezel can also be switched so this will work in a 69-72 truck. Take care, Tom Attached Images __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-17-2018, 11:10 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,717	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Looks nice! __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-20-2018, 04:13 PM	#3
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge TTT, I have had some offers on this elsewhere. I will accept offers on it but looking to get at least $400.00 plus shipping. Thank you and have a good weekend. Also will be listing a restored 67/68 style bezel tach cluster with my volt gauge conversion soon. Please remember I can swap bezels on these clusters to whatever is wanted, 69-72 style, black with chrome or wood grain, etc Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-21-2018, 09:25 AM	#4
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge excellent work , looks very nice __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

01-25-2018, 07:13 PM	#5
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Tom, would you take $350 shipped with the Volt gauge conversion and a 69-72 bezel? I lost out on this one to Leon in June by 6 minutes that would have been for $350 shipped http://67-72chevytrucks.com/vboard/s...d.php?t=739143 I am using a AAW harness, so I do need the volt gauge conv right?? __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

01-25-2018, 08:11 PM	#6
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,329	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge P u r d y ! __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

01-28-2018, 11:11 AM	#10
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge TTT I have sold the 80 lb gauge from this cluster and installed a very nice 60 lb gauge (tested for function and accuracy. I do have an 80 lb gauge that needs face restoration if someone needs an 80 lb gauge with this cluster. I can also add a clock to it for an additional charge. I have a dozen 69-72 black/chrome bezels on the way if it needs to be swapped to that style. Price is $400.00 shipped within the CON US. It is ready to ship as is or wait until new bezels arrive. Thank you for looking, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-30-2018, 08:06 PM	#11
mrtoni Senior Member Join Date: Jan 2009 Location: sparks, nevada Posts: 1,879	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge I'd do the 400 shipped with a 72 bezel. Do you have wiring pigtails by chance? My burb arrived with dash apart and 3 gauges no bezel hanging wires. Matt

02-06-2018, 10:26 PM	#14
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Cluster is SOLD, Thank you mrtoni __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

02-10-2018, 03:52 PM	#15
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,870	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Dang it! I was scrolling down hoping this was still available! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-11-2018, 03:35 AM	#16
72 Chevy Trucks Registered User Join Date: Dec 2011 Location: Greensboro NC Posts: 10	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge DO you have any 80 lb. oil gauges that you will sell separately? I am looking for a nice 80 lb. gauge shipped to 27406. Thanks... Steve

02-11-2018, 06:54 AM	#17
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge Nice looking piece! Tom your work is 2nd to none!

03-08-2019, 05:44 PM	#20
Baker72chevy Registered User Join Date: Apr 2013 Location: North pickens SC Posts: 294	Re: 67-72 Chevy/GMC tach cluster restored with 80 lb oil gauge What color is the gaug arms



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.