5/5 drop 83 C10 SWB for sale in CT - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jon_volk · 06-23-2003, 09:08 AM

Parting ways with my 83 C10 shortbed. It has a fresh DJM suspension spindle/coil springs up front and a DJM flip kit out back. Also the entire front suspension has a fresh rebuild on it with less than 500 miles. Its got a 305 (120k i think?) with K&N extreme top open element air filter, headers, 2.5" mandrel bent exhuast w/ dynomax ultra flow mufflers. runs good but has a leak somewhere. ive always just parked it over a drip pan and its been fine. 700r4 tranny slips between 1-2 when left in drive but shifts pretty good when gears are manually selected. could probably go another 6 months before really needing a rebuild. Body has usual dings and dents for a 20 year old truck and is 99% rust free. the only rust is a little surface stuff on the drivers side door sill. no rot to speak of. windshield has a crack but is still intact.....

heres some pics i just took this morning.

car is located in milford, CT 06460

make offer

pic 1

pic 2

pic 3

pic 4

pic 5

gldevall · 06-23-2003, 03:47 PM

No engine pics???

jon_volk · 06-23-2003, 06:16 PM

here ya go

jon_volk · 06-26-2003, 07:34 AM

1000 takes it.

jon_volk · 06-29-2003, 10:22 AM

750 firm must go

jon_volk · 07-02-2003, 07:17 AM

ttt

kxmotox247 · 07-02-2003, 11:33 AM

If it were closer, i'd probably take it. Too bad.

jon_volk · 07-06-2003, 01:23 PM

buuuuuuuuumpin to the top again.

Boones · 07-07-2003, 05:38 PM

how well does it run... would it make it down ot South Carolina
send me an email at showtimesc@aol.com

jon_volk · 07-08-2003, 01:46 PM

i used it as a daily driver for almost a year with no problems. the only reason i parked it/decided to sell was that i bought a 92 camaro. i dont see why it wouldnt make it down there.

phantom dually · 07-08-2003, 07:33 PM

How far are you from Louisville KY??

Slammed '87 · 07-08-2003, 08:04 PM

That would be a sweet truck to rebuild/customize. Is that original paint? Man i wish it was in Canada, or even closer.

jon_volk · 07-09-2003, 07:30 AM

Quote:

Originally posted by phantom dually
How far are you from Louisville KY??

about 800 miles

jon_volk · 07-16-2003, 07:36 AM

ttt

Shorti · 07-16-2003, 07:55 AM

will you take 500 for the truck! i live in jersey dont live that far!

jon_volk · 07-16-2003, 01:08 PM

Quote:

Originally posted by Shorti
will you take 500 for the truck! i live in jersey dont live that far!

no, 750 is a huge loss and i said firm.

**crossy** · 07-16-2003, 01:59 PM

Jon, knowing how rare it is to find rust free anywhere on the east coast I have to believe that with the growing popularity of these trucks as hot rods that even a cheap ad in a local paper would sell that truck for you. Ask $900 . If I wearn't going on vaca soon I would add that one to my colloection in a heatbeat(pun) . DAVE

**crossy** · 07-16-2003, 02:43 PM

Jon, I may have talked a friend into it send your phone number to me at all4trux@snip.net thanx , DAVE

AirMale · 07-16-2003, 05:12 PM

I have the perfect 383/450hp engine for that truck!

daddywarbucks · 06-01-2004, 06:41 PM

still have that chevy for sale? im looking for a lowered 2wd shortie to drop my stroked 305 in- i live near binghamton, ny and it doesnt look like too far of a drive - think it would make the trip??

06-23-2003, 09:08 AM	#1
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	5/5 drop 83 C10 SWB for sale in CT Parting ways with my 83 C10 shortbed. It has a fresh DJM suspension spindle/coil springs up front and a DJM flip kit out back. Also the entire front suspension has a fresh rebuild on it with less than 500 miles. Its got a 305 (120k i think?) with K&N extreme top open element air filter, headers, 2.5" mandrel bent exhuast w/ dynomax ultra flow mufflers. runs good but has a leak somewhere. ive always just parked it over a drip pan and its been fine. 700r4 tranny slips between 1-2 when left in drive but shifts pretty good when gears are manually selected. could probably go another 6 months before really needing a rebuild. Body has usual dings and dents for a 20 year old truck and is 99% rust free. the only rust is a little surface stuff on the drivers side door sill. no rot to speak of. windshield has a crack but is still intact..... heres some pics i just took this morning. car is located in milford, CT 06460 make offer pic 1 pic 2 pic 3 pic 4 pic 5 __________________ 83 Monte Carlo 92 Camaro

06-23-2003, 03:47 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	No engine pics??? __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-23-2003, 06:16 PM	#3
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	here ya go Last edited by jon_volk; 06-23-2003 at 06:25 PM.

07-02-2003, 11:33 AM	#7
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	If it were closer, i'd probably take it. Too bad. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

07-08-2003, 07:33 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	How far are you from Louisville KY?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

06-26-2003, 07:34 AM	#4
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	1000 takes it.

06-29-2003, 10:22 AM	#5
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	750 firm must go

07-02-2003, 07:17 AM	#6
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	ttt

07-06-2003, 01:23 PM	#8
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	buuuuuuuuumpin to the top again.

07-07-2003, 05:38 PM	#9
Boones Registered User Join Date: Jun 2003 Location: Charleston SC Posts: 47	how well does it run... would it make it down ot South Carolina send me an email at showtimesc@aol.com

07-08-2003, 01:46 PM	#10
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	i used it as a daily driver for almost a year with no problems. the only reason i parked it/decided to sell was that i bought a 92 camaro. i dont see why it wouldnt make it down there.

07-08-2003, 08:04 PM	#12
Slammed '87 Registered User Join Date: Feb 2003 Location: Calgary Canada Posts: 556	That would be a sweet truck to rebuild/customize. Is that original paint? Man i wish it was in Canada, or even closer. __________________ If you can't rock the roads with your bumpers 1/2" off the ground, you're nowhere near low enough!

07-16-2003, 07:36 AM	#14
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	ttt

07-16-2003, 07:55 AM	#15
Shorti Registered User Join Date: Jul 2003 Location: jersey Posts: 3	will you take 500 for the truck! i live in jersey dont live that far!

07-16-2003, 01:59 PM	#17
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jon, knowing how rare it is to find rust free anywhere on the east coast I have to believe that with the growing popularity of these trucks as hot rods that even a cheap ad in a local paper would sell that truck for you. Ask $900 . If I wearn't going on vaca soon I would add that one to my colloection in a heatbeat(pun) . DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

07-16-2003, 02:43 PM	#18
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Jon, I may have talked a friend into it send your phone number to me at all4trux@snip.net thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

07-16-2003, 05:12 PM	#19
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	I have the perfect 383/450hp engine for that truck! __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

06-01-2004, 06:41 PM	#20
daddywarbucks Registered User Join Date: May 2004 Posts: 6	still have that chevy for sale? im looking for a lowered 2wd shortie to drop my stroked 305 in- i live near binghamton, ny and it doesnt look like too far of a drive - think it would make the trip??

Register or Log In To remove these advertisements.