MI 67 GMC Parts / Part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DaHos** · 12-04-2018, 02:08 PM

Quote:

Originally Posted by steve cole

is that a low hump or high hump tranny tunnel? I am looking for a high hump.
Thanks.

low

**Cam1968rsss** · 12-05-2018, 03:49 PM

By any chance still have radio speaker and wiring?

Thanks
Eddie

**Backroads67** · 12-05-2018, 04:16 PM

Interested in the windshield and rear window ss trim?

Madkidd007 · 12-10-2018, 02:52 AM

Interested in the ball studs that screw into the floor that the accelerator pedal pops onto. Also interested in taillight panel cuts if willing and depending on condition.

TBohne · 12-10-2018, 10:54 PM

I did not see where anyone asked about the hub caps can you post more pics of them and shipping to 77830? Thanks

**michael bustamante** · 12-11-2018, 12:22 PM

how much are you askin for the vent windows?

**DaHos** · 12-11-2018, 04:47 PM

Quote:

Originally Posted by Backroads67

Interested in the windshield and rear window ss trim?

I do have some nice (few flaws) 67-70 deep groove trim available. Shipping is not the most economical due to size. $75 for the front and rear plus shipping.

Quote:

Originally Posted by Madkidd007

Interested in the ball studs that screw into the floor that the accelerator pedal pops onto. Also interested in taillight panel cuts if willing and depending on condition.

Rotted off.......Both taillight sections are damaged, sry

Quote:

Originally Posted by TBohne

I did not see where anyone asked about the hub caps can you post more pics of them and shipping to 77830? Thanks

Only 3 of the and they are ROUGH !!

Quote:

Originally Posted by michael bustamante

how much are you askin for the vent windows?

Both vent window sash studs are broke, I was hoping for a good chrome set to restore......

**michael bustamante** · 12-11-2018, 04:59 PM

dang. too bad. I was hoping theyd be decent.
your back window has stainless trim? on the 67?

Madkidd007 · 12-11-2018, 06:47 PM

Quote:

Originally Posted by DaHos

[COLOR="Red"]

[COLOR="red"]Rotted off.......Both taillight sections are damaged, sry

Still may be interested in both, the ball studs MIA or just eat up? Taillight panels can you post a picture, using them to do some custom work so may be useable still.

TBohne · 12-11-2018, 09:47 PM

Can you send pics of the caps?

wpavlis · 12-12-2018, 09:57 PM

I am interested in the rear view mirror. Can you post a picture?

tx68 · 05-20-2019, 10:48 PM

The thread is a few months old, but I'm taking a shot to see if you have a couple of parts.

You wouldn't happen to have the ebrake handle and under dash mounting bracket?

It looked like it was maybe attached in one photo but removed in another photo.

Thanks.

TBohne · 05-21-2019, 08:09 AM

Would still like to see some pics of the caps if you still have them, are they stainless or painted?

**DaHos** · 05-21-2019, 10:01 AM

Quote:

Originally Posted by tx68

The thread is a few months old, but I'm taking a shot to see if you have a couple of parts.

You wouldn't happen to have the ebrake handle and under dash mounting bracket?

It looked like it was maybe attached in one photo but removed in another photo.

Thanks.

I do, $40 plus shipping

Quote:

Originally Posted by TBohne

Would still like to see some pics of the caps if you still have them, are they stainless or painted?

Rusted Chrome and there was only 1, sry

**CarlsLQ9SS** · 05-21-2019, 12:18 PM

Are you selling any brackets off of the frame? I need both front leaf spring hangers for the rear end and the upper pass shock hanger. If so a shipped price to 40741

tx68 · 05-21-2019, 08:35 PM

IÂ’ll take the e-brake handle and mounting bracket. If youÂ’ll send PM with total including shipping to 75023 and confirm PayPal, IÂ’ll send funds. Thanks!

**michael bustamante** · 05-21-2019, 10:27 PM

You still got the dash cluster?
Also, did that horn button ever sell?

67C10GS · 05-24-2019, 02:35 AM

How much for the front park lamps and pigtails?

dblwoof · 06-03-2019, 11:15 PM

Any chance you still have the emergency brake handle and bracket 67-72

f.flujan · 06-05-2019, 09:20 PM

I need door upper and lower hinges for both sides

Richard Jensen · 06-05-2019, 10:38 PM

Hello,
Would you sell the carb and air cleaner? I'm looking for a Rochester model "M" and air cleaner. Shipping to 67548.

12-05-2018, 03:49 PM	#52
Cam1968rsss Senior Member Join Date: Oct 2010 Location: Zavalla, TX Posts: 428	Re: 67 GMC Parts / Part out By any chance still have radio speaker and wiring? Thanks Eddie

12-05-2018, 04:16 PM	#53
Backroads67 Active Member Join Date: Sep 2016 Location: Washington, Ia. Posts: 115	Re: 67 GMC Parts / Part out Interested in the windshield and rear window ss trim? __________________ 72 K10 swb in progress 67 C10 swb 66 chevelle SS Conv 40 Plymouth pickup

12-10-2018, 02:52 AM	#54
Madkidd007 Registered User Join Date: Nov 2018 Location: Locust grove, Ga Posts: 2,254	Re: 67 GMC Parts / Part out Interested in the ball studs that screw into the floor that the accelerator pedal pops onto. Also interested in taillight panel cuts if willing and depending on condition. __________________ 70 C10 highschool truck now C20 cummins powered 72 Crew Denali, Bigger, Stronger, Faster, well you get the point..... the ole 65 continental Syclone killer AWD T56 LS Paypal please pay as Goods&Services Madkidd00000007@yahoo.com

12-10-2018, 10:54 PM	#55
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: 67 GMC Parts / Part out I did not see where anyone asked about the hub caps can you post more pics of them and shipping to 77830? Thanks

12-11-2018, 12:22 PM	#56
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 GMC Parts / Part out how much are you askin for the vent windows? __________________ 1967custom

12-11-2018, 04:59 PM	#58
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 GMC Parts / Part out dang. too bad. I was hoping theyd be decent. your back window has stainless trim? on the 67? __________________ 1967custom

12-11-2018, 09:47 PM	#60
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: 67 GMC Parts / Part out Can you send pics of the caps?

12-12-2018, 09:57 PM	#61
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 315	Re: 67 GMC Parts / Part out I am interested in the rear view mirror. Can you post a picture?

05-20-2019, 10:48 PM	#62
tx68 Registered User Join Date: Jan 2012 Location: Plano, TX Posts: 69	Re: 67 GMC Parts / Part out The thread is a few months old, but I'm taking a shot to see if you have a couple of parts. You wouldn't happen to have the ebrake handle and under dash mounting bracket? It looked like it was maybe attached in one photo but removed in another photo. Thanks.

05-21-2019, 08:09 AM	#63
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: 67 GMC Parts / Part out Would still like to see some pics of the caps if you still have them, are they stainless or painted?

05-21-2019, 12:18 PM	#65
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: 67 GMC Parts / Part out Are you selling any brackets off of the frame? I need both front leaf spring hangers for the rear end and the upper pass shock hanger. If so a shipped price to 40741

05-21-2019, 08:35 PM	#66
tx68 Registered User Join Date: Jan 2012 Location: Plano, TX Posts: 69	Re: 67 GMC Parts / Part out IÂ’ll take the e-brake handle and mounting bracket. If youÂ’ll send PM with total including shipping to 75023 and confirm PayPal, IÂ’ll send funds. Thanks!

05-21-2019, 10:27 PM	#67
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,878	Re: 67 GMC Parts / Part out You still got the dash cluster? Also, did that horn button ever sell? __________________ 1967custom Last edited by michael bustamante; 05-21-2019 at 10:33 PM.

05-24-2019, 02:35 AM	#68
67C10GS Registered User Join Date: Dec 2018 Location: Jerome, ID Posts: 77	Re: 67 GMC Parts / Part out How much for the front park lamps and pigtails? __________________ 1967 GMC C15 sb 6.0 lq4 pro daily. Named the “formula 10”

06-03-2019, 11:15 PM	#69
dblwoof Registered User Join Date: Jul 2014 Location: Dallas TX Posts: 4	Re: 67 GMC Parts / Part out Any chance you still have the emergency brake handle and bracket 67-72



Register or Log In To remove these advertisements.

06-05-2019, 09:20 PM	#70
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: 67 GMC Parts / Part out I need door upper and lower hinges for both sides

06-05-2019, 10:38 PM	#71
Richard Jensen Registered User Join Date: Feb 2018 Location: LaCrosse Ks. Posts: 50	Re: 67 GMC Parts / Part out Hello, Would you sell the carb and air cleaner? I'm looking for a Rochester model "M" and air cleaner. Shipping to 67548. __________________ Lead, follow, or get out of the way!

Register or Log In To remove these advertisements.