AZ WTB bed stake pocket (front driver side) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tuff Gong · 05-29-2019, 08:53 AM

The previous owner of my truck cut out the bed stake pocket to install a gas tank. I now what to buy one and weld it back into place. If anyone has an old bed and can cut one out for me, please let me know. I only need the pocket

**Jcfcamaro** · 05-29-2019, 11:32 AM

I have this one I cut out to get to a cab cut I needed.

**Jcfcamaro** · 05-29-2019, 11:34 AM

One more

Tuff Gong · 05-29-2019, 12:31 PM

That looks like it would work. Is it bent up at all? Are any of the flanges cut

**Jcfcamaro** · 05-29-2019, 12:56 PM

Quote:

Originally Posted by Brian Atkinson

That looks like it would work. Is it bent up at all? Are any of the flanges cut

Not sure what your asking about flanges? But it's straight and the stake pocket is good also. I would just make templates of what is missing on yours and cut the outside and inside pieces out of the donor cut then weld the stake pocket in last.

**Jcfcamaro** · 05-29-2019, 01:02 PM

Oh wait, if your talking about the stake pocket I did cut a little too close on the front side but it would still work fine and being its towards the front your not going to see it.

Tuff Gong · 05-29-2019, 01:29 PM

Looks good. What are you thinking on price?

projectking · 05-29-2019, 01:31 PM

I have a bed to cut up if his won’t work

Tuff Gong · 05-29-2019, 03:43 PM

Quote:

Originally Posted by projectking

I have a bed to cut up if his won’t work

Thank you

**Jcfcamaro** · 05-29-2019, 06:42 PM

You can have it for shipping. P.m me your info and I'll get a shipping quote.

05-29-2019, 08:53 AM	#1
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	WTB bed stake pocket (front driver side) The previous owner of my truck cut out the bed stake pocket to install a gas tank. I now what to buy one and weld it back into place. If anyone has an old bed and can cut one out for me, please let me know. I only need the pocket Attached Images

05-29-2019, 11:32 AM	#2
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: WTB bed stake pocket (front driver side) I have this one I cut out to get to a cab cut I needed. Attached Images

05-29-2019, 11:34 AM	#3
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: WTB bed stake pocket (front driver side) One more Attached Images

05-29-2019, 12:31 PM	#4
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: WTB bed stake pocket (front driver side) That looks like it would work. Is it bent up at all? Are any of the flanges cut

05-29-2019, 01:02 PM	#6
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: WTB bed stake pocket (front driver side) Oh wait, if your talking about the stake pocket I did cut a little too close on the front side but it would still work fine and being its towards the front your not going to see it. Attached Images

05-29-2019, 01:29 PM	#7
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: WTB bed stake pocket (front driver side) Looks good. What are you thinking on price?

05-29-2019, 01:31 PM	#8
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB bed stake pocket (front driver side) I have a bed to cut up if his won’t work __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

05-29-2019, 06:42 PM	#10
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: WTB bed stake pocket (front driver side) You can have it for shipping. P.m me your info and I'll get a shipping quote.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.