New to this / need VIN help

[Project68C10]

hey everyone, im new to this forum and i was wondering if someone could help me out here. im looking to buy a 68 Chevy C10 down the street from me. as for the Vin its

CE148A155377

I was also wondering about the motor. if im not misstakin they came with either a 307, 327, or 396? well how do I figure out what motor it is. im pretty sure its not a 396, so its either a 307 or 327, and yes its org. its also backed by a 4 speed with a creeper gear. thanks for the help

Justin
chesterfield, MI

[adamls]

C=4X2
E=V-8 Gas
1=1/2 ton
4=Cab with Bed
8=1968
A=Assembled in Atlanta
155377=Serial Number

All the above was found on the Vin Decoder page on this site

http://67-72chevytrucks.net/Chevyear.html

The engine should have stampings on the block. You can get more info on those stamps and their locations at www.mortec.com

[Project68C10]

hey thanks for the info.

[toms68cst]

If it had either the optional 327 or 396 engine it will be listed on the glove box door as an option. If not, than you can assume it came with a 307 from the factory. The only way to know for sure what's under the hood is to run the numbers on the back of the block.