IA WTB passenger side step fender. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

57Suburb · 05-17-2018, 12:49 PM

Looking for a solid fender, no rust. Just seeing if anyone is sitting on one. 67 vintage would be the ultimate find, but later would work. Thanks

57Suburb · 06-12-2019, 11:23 AM

TTT, still looking.

projectking · 06-12-2019, 11:49 AM

I have a ‘67, won’t be near it till Saturday though

57Suburb · 06-12-2019, 11:54 AM

Quote:

Originally Posted by projectking

I have a ‘67, won’t be near it till Saturday though

OK, let me know what you find.

cypressbog · 06-12-2019, 02:30 PM

I have 3 available in various quality and price.

I have a pallet to fit them too.

I have pictures of the best one here: $250 plus the ride. Very rust free. Very straight with 2 minor dents. The mounting flange requires zero repair.

projectking · 06-12-2019, 06:29 PM

Here’s a couple pics I had on the phone

57Suburb · 06-13-2019, 08:30 AM

Quote:

Originally Posted by projectking

Here’s a couple pics I had on the phone

I'll keep these in mind. I'm really just needing a cut off to repair the one I have. Your's might be to good to butcher.

projectking · 06-13-2019, 09:15 AM

Oh, you confused my by mentioning wanting a ‘67. I have 2 sets of fenders inside a container I’ll look to see if I have one to cut for you

57Suburb · 06-13-2019, 09:25 AM

Quote:

Originally Posted by projectking

Oh, you confused my by mentioning wanting a ‘67. I have 2 sets of fenders inside a container I’ll look to see if I have one to cut for you

Yes, when I originally posted this, I was just going to replace the whole fender, but I've come to realize now, that what I have is very good, just needs that lower part repaired. Plus a cutoff is way easier to ship.

projectking · 06-13-2019, 09:47 AM

Quote:

Originally Posted by 57Suburb

Yes, when I originally posted this, I was just going to replace the whole fender, but I've come to realize now, that what I have is very good, just needs that lower part repaired. Plus a cutoff is way easier to ship.

Right on, I’ll see what’s there

cypressbog · 06-13-2019, 12:51 PM

I'll pull the rust free but dented up one out of the basement and see if that area looks good. I happen to have a cutting torch that I haven't sold yet too. If it looks good, I'll send you a pic and price to get it to you.

cypressbog · 06-13-2019, 06:38 PM

That lower area looks real good!

Let me know how far up you want a cut and I’ll get it done for $25 plus shipping.

57Suburb · 06-14-2019, 08:32 AM

Quote:

Originally Posted by cypressbog

That lower area looks real good!

Let me know how far up you want a cut and I’ll get it done for $25 plus shipping.

That looks pretty good and is a fair price. If you could cut it right below the belt line (9 inches), that would work perfect.

cypressbog · 06-14-2019, 07:52 PM

Okay, I’ll get it cut tomorrow. Probably take the other side off too and junk the rest. Another thing outta the basement that been there 14 years, lol

cypressbog · 06-16-2019, 02:24 PM

I got it out of the dark basement and into daylight. I notice inperfect metal right at the body line and another small imperfection at the wheel well. Let me know your thoughts.

cypressbog · 06-16-2019, 11:54 PM

Got it cut off today. Here’s some after shots. Pictures don’t show it all. I’ll send to you for shipping costs if you want it. It needs to be skimmed with a light filler or hammer and dolly lightly.

cypressbog · 06-18-2019, 02:37 PM

TTT. Waiting for reply.

cypressbog · 06-24-2019, 03:11 PM

TTT, One more time.

57Suburb · 06-24-2019, 03:28 PM

Sorry about that, I usually get a notice of a reply but not this time. I still want it. PM me with your payment details. This will ship to 50151.

cypressbog · 06-25-2019, 05:50 PM

You got it!

57Suburb · 06-26-2019, 08:47 AM

Sent you a PM.

57Suburb · 06-27-2019, 09:56 AM

What's the word on this?

cypressbog · 06-27-2019, 06:56 PM

I sent pm this afternoon. Shipping ended up at 29.80.

05-17-2018, 12:49 PM	#1
57Suburb Registered User Join Date: Apr 2014 Location: Southern Iowa Posts: 310	WTB passenger side step fender. Looking for a solid fender, no rust. Just seeing if anyone is sitting on one. 67 vintage would be the ultimate find, but later would work. Thanks __________________ 1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600

06-12-2019, 11:23 AM	#2
57Suburb Registered User Join Date: Apr 2014 Location: Southern Iowa Posts: 310	Re: WTB passenger side step fender. TTT, still looking. __________________ 1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600

06-12-2019, 11:49 AM	#3
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB passenger side step fender. I have a ‘67, won’t be near it till Saturday though __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

06-12-2019, 02:30 PM	#5
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. I have 3 available in various quality and price. I have a pallet to fit them too. I have pictures of the best one here: $250 plus the ride. Very rust free. Very straight with 2 minor dents. The mounting flange requires zero repair. Attached Images

06-12-2019, 06:29 PM	#6
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB passenger side step fender. Here’s a couple pics I had on the phone Attached Images __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

06-13-2019, 09:15 AM	#8
projectking Registered User Join Date: Oct 2006 Location: Orland Park Il Posts: 2,041	Re: WTB passenger side step fender. Oh, you confused my by mentioning wanting a ‘67. I have 2 sets of fenders inside a container I’ll look to see if I have one to cut for you __________________ 68 GMC C3500 Longhorn DRW 67 Chevy C10 LWB 90 Mustang Gt 90 Mustang Notchback

06-13-2019, 12:51 PM	#11
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. I'll pull the rust free but dented up one out of the basement and see if that area looks good. I happen to have a cutting torch that I haven't sold yet too. If it looks good, I'll send you a pic and price to get it to you.

06-13-2019, 06:38 PM	#12
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. That lower area looks real good! Let me know how far up you want a cut and I’ll get it done for $25 plus shipping. Attached Images

06-14-2019, 07:52 PM	#14
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. Okay, I’ll get it cut tomorrow. Probably take the other side off too and junk the rest. Another thing outta the basement that been there 14 years, lol

06-16-2019, 02:24 PM	#15
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. I got it out of the dark basement and into daylight. I notice inperfect metal right at the body line and another small imperfection at the wheel well. Let me know your thoughts. Attached Images

06-16-2019, 11:54 PM	#16
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. Got it cut off today. Here’s some after shots. Pictures don’t show it all. I’ll send to you for shipping costs if you want it. It needs to be skimmed with a light filler or hammer and dolly lightly. Attached Images

06-18-2019, 02:37 PM	#17
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. TTT. Waiting for reply.

06-24-2019, 03:11 PM	#18
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. TTT, One more time.

06-24-2019, 03:28 PM	#19
57Suburb Registered User Join Date: Apr 2014 Location: Southern Iowa Posts: 310	Re: WTB passenger side step fender. Sorry about that, I usually get a notice of a reply but not this time. I still want it. PM me with your payment details. This will ship to 50151. __________________ 1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600

06-25-2019, 05:50 PM	#20
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. You got it!



Register or Log In To remove these advertisements.

06-26-2019, 08:47 AM	#21
57Suburb Registered User Join Date: Apr 2014 Location: Southern Iowa Posts: 310	Re: WTB passenger side step fender. Sent you a PM. __________________ 1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600

06-27-2019, 09:56 AM	#22
57Suburb Registered User Join Date: Apr 2014 Location: Southern Iowa Posts: 310	Re: WTB passenger side step fender. What's the word on this? __________________ 1972 C30 Grain Hauler, 350/400 1967 1500 GMC Stepside SWB, In Transformation Process 1967 RS/SS Camaro 350/TKO600

06-27-2019, 06:56 PM	#23
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: WTB passenger side step fender. I sent pm this afternoon. Shipping ended up at 29.80.

Register or Log In To remove these advertisements.