1970 K10 fuel tank for EFI?

[loucks10]

Getting ready to throw my new engine in my 70 K10 and am installing a Holley sniper EFI for fuel delivery. My question is... I have a stock gas tank behind the seat, and am wanting to upgrade to a EFI tank setup with splash baffles and in tank fuel pump. Who makes these? There is much more our there for C10's, so can I use a C10 tank? Should I stay with behind the seat tank, or move to the frame?

[wesmigletz]

I've been looking into this for my 67 for a while. I'm leaning towards using a 69 Camaro gas tank that is already set-up for EFI. It mounts in the rear under the bed. You will need a sport bumper and a fold-down license plate, but you do not need to cut your bed for a fuel fill. There are a couple threads on this in the forum.

The downside is that you're limited to the fuel capacity of a Camaro tank.

[driller35]

I found this yesterday in search and is maybe the route you would like to apply , thinking this will be good for my 70 c10 sniper efi project
http://67-72chevytrucks.com/vboard/s...fi+in+cab+tank

[loucks10]

Originally Posted by wesmigletz

I've been looking into this for my 67 for a while. I'm leaning towards using a 69 Camaro gas tank that is already set-up for EFI. It mounts in the rear under the bed. You will need a sport bumper and a fold-down license plate, but you do not need to cut your bed for a fuel fill. There are a couple threads on this in the forum.

The downside is that you're limited to the fuel capacity of a Camaro tank.

I'd like to keep the stock bumper etc... And the limited fuel capacity is a bummer too.

[loucks10]

Originally Posted by driller35

I found this yesterday in search and is maybe the route you would like to apply , thinking this will be good for my 70 c10 sniper efi project
http://67-72chevytrucks.com/vboard/s...fi+in+cab+tank

Thanks. I'm leaning toward that Edelbrock fuel sump.... Probably the easiest and most time/cost effective way to go.